Jump to content

visu-al

Dormant
  • Posts

    187
  • Joined

  • Last visited

Posts posted by visu-al

  1. I printed allready many Jobs over USB so i guess this can't be the problem. Also tried many usb-sticks for the update.

    Why then are my files not correctly named, when i just download them and put them on the stick. No different versions at the first try. Just did what i was advised to.

     

    I now renamed the files, but have to wait till tomorrow to test it, because im printing actually a larger Job.

     

    Thanks for the help so far.

     

     

    Kind regards,

     

    Alexander

  2. Hi Raymond

     

    I'm in that companys network with firewall and login but the job-transfering works and i tought update via USB-Stick must run anyway.

    For USB update i downloaded the latest Firmware a few days ago the day i posted and before the last one (the latest two where tested)

    According to Ultimaker.com guide i downloaded the latest.tar.tar and latest.tar.xz.tar (56994 and 1 kB) from the official Ultimaker site.

    I did it with different Versions and different USB Stick and i downloaded the files many times.

    It doesn't even seem to look at the USB Stick it just says "no Firmware found" quickly.

     

     

    Kind regards,

     

    Alexander

     

  3. Hello together,

     

    i have a similiar problem with our new UM3.

    Can't update the Firmware.

     

    Tried Wifi/Cabel and USB only.

     

    USB just says failed and Wifi shows a HTML Code wich need's aprox. 5 second to scroll trough.

    I have Images and Logfiles if the uploading works.

     

    Thanks People

     

    Alexander

    LOG20062018.zip

    P1060223.png

    P1060224.png

    P1060225.png

    P1060226.png

    P1060227.png

    P1060228.png

    P1060229.png

  4. Kannst du deinen damit erzeugten gcode mal hochladen (zb dropbox) dann kann man sich das mal genauer anschauen.

    Es gibt keine X/Y Layer du meinst wohl einfach Z-Layer ja: Teilhöhe / Schichthöhe = Layerzahl

    -> Layerzahl mal Schichtöhe = Teilhöhe (für die Pause)

    Normalerweise gebe ich einen Wert im Pause @ Height ein und schaue die Layerview an und siehe die Pause schön..

     

  5. Hallo robinlimpek

    Version 1 klappt nur mit gutem "bed-leveling"

    Ich drucke dafür zuerst einen Text der 0.2mm hoch ist mit ZWEI 0.1mm Layer

    Diese Haften prima wenn das Bett korregt niveliert ist (nur PLA)

    Dan starte ich den nächsten GCODE der first layer 0.3mm hat damit das ganze drüberstreicht.

    Funktioniert einwandfrei so.

    So dann dein zweites Beispiel:

    Dies DARF NICHT aus 2 GCODES bestehen sondern nur aus einem. Denn wenn du das nicht anpasst startet der nächste immer ganz unten.

    Also du musst über das PLUGIN PAUSE AT HEIGHT einstellen wann die Farbe ändern muss gib also den letzten Layer oder die Höhe an bei der noch die erste Farbe druckt.

    Dann macht der Ultimaker eine Pause fährt nach oben und du kannst die neue Farbe einführen über Change Filament im Menüt oder wenn du Roberts Feeder hast einfach ausklinken und wechseln.

    Dann Resume oder so anklicken und der Drucker druckt den Rest in Farbe 2

    Ich hoffe das hilft.

    Gruss VISU-AL

     

  6. I' love to bring this to the market.

    However, there are too many possible variants at the moment:

    UMO, UM+, UM2, UM-like printers

    stock hotend, Merlin, E3D, ...

    direct drive (NEMA8), flexdrive (bowden I'd exclude from the list)

    Evaluating these alternatives is essential if you want to narrow down the list. But this is beyond my time and budget as a one-man-show. So we need some sort of cooperation to bring this forward.

    So you say i don't need to buy an UMO to make this happen eventually? I'd love to buy another UM2 just to do this setup XD

     

  7. No, it is a bigger part and it doesn't really matter where i attach the measuring tip..

    The last Olson block i ordered, is for this machine to go and try 0.8mm wide and 0.5mm hight ;)

    Yes it combines well as i tested different layers/heights connecting in the print, i will test top to bottom and same line next time and write it down to have a better answer :cool:

    i try to imagine how this works that layer height effects the conductivity so much but no luck so far :mad:

     

  8. Oh yes step nr. 4 must be with the mouse over the 3d space ;)

    You can also create a library for everything you want some presets are allready there but you can also create presets that are respecting some shrinking if you know or testet the tolerances on your printer and automatically create all kind of heads hex or round with allen bit holes and then just export to stl or even scale it 10 times ( press S and 10) to have the right size in cura. i really love it. if someone wants preset libraries without creating them, just tell me what you want and i create it..

     

×
×
  • Create New...