Jump to content

jesimon

Dormant
  • Posts

    6
  • Joined

  • Last visited

Everything posted by jesimon

  1. I posted this in the Ultimaker 3D Printers section, but the issue seems to have started when I installed Cura v4.4.0, so I'm posting a copy here as well. Ever since Cura v4.4 was released with the new intent-based profiles, I have found that I'm having some dimensional accuracy issues when printing on the S5. I used the Engineering Profile, which is supposed to provide the greatest dimensional accuracy, but the resulting parts do not fit like they should. I have been printing e-NABLE hand devices with my S5 ever since I got it, and it has always worked great. But using Cura v4.4.0, I printed an e-NABLE hand, and none of the parts would fit together. I could not get the pins into the holes, even using a great deal of force. I also recently printed a bunch of these USB Flash Drive Cryptex cases. The rings were much tighter than they should be and were difficult to rotate once installed. Here's the thing... I did both of the above prints on the Ultimaker S3, using the same version of Cura, exact same settings, and the same material, and in both cases, the prints came out perfectly. The e-NABLE hand parts fit perfectly, and the rings on the cryptex holder moved easily and smoothly. So I'm not sure if the issue is related to Cura's print profiles for the Ultimake S5 or something with the S5 firmware. I'm hoping it's something related to the Cura profile settings, as that would be an easy fix. I just installed Cura v4.4.1 but have not had time to test this again to see if it has changed. Has anyone else encountered this issue with the latest version of Cura and the Ultimaker S5? Any suggestions?
  2. Ever since Cura v4.4 was released with the new intent-based profiles, I have found that I'm having some dimensional accuracy issues when printing on the S5. I used the Engineering Profile, which is supposed to provide the greatest dimensional accuracy, but the resulting parts do not fit like they should. I have been printing e-NABLE hand devices with my S5 ever since I got it, and it has always worked great. But using Cura v4.4.0, I printed an e-NABLE hand, and none of the parts would fit together. I could not get the pins into the holes, even using a great deal of force. I also recently printed a bunch of these USB Flash Drive Cryptex cases. The rings were much tighter than they should be and were difficult to rotate once installed. Here's the thing... I did both of the above prints on the Ultimaker S3, using the same version of Cura, exact same settings, and the same material, and in both cases, the prints came out perfectly. The e-NABLE hand parts fit perfectly, and the rings on the cryptex holder moved easily and smoothly. So I'm not sure if the issue is related to Cura's print profiles for the Ultimake S5 or something with the S5 firmware. I'm hoping it's something related to the Cura profile settings, as that would be an easy fix. I just installed Cura v4.4.1 but have not had time to test this again to see if it has changed. Has anyone else encountered this issue with the latest version of Cura and the Ultimaker S5? Any suggestions?
  3. According to Ultimaker, firmware v5.4.24 will be released on Monday, 12/9/2019. This will include full support for the S5 Pro Bundle components (Material Station and Air Manager).
  4. Whoops! Wrong thread! Sorry about that! I'll repost in the right thread.
  5. Hmm, I'm not seeing it in the Marketplace or in your screenshot. Are you referring to "Printer Settings"? That's something different.
  6. It looks like the Cura Settings Guide plugin is no longer available in the Cura v4.0 Marketplace. Are there plans to update it so it will be available in Cura v4.0?
×
×
  • Create New...