joelmongeon
Dormant-
Posts
52 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by joelmongeon
-
Move from Paris to Seattle : I am lost with US 3D shop
joelmongeon replied to ultimprint's topic in Coffee corner
Welcome to Seattle! I have found filament at Fry's but it was a brand identity never heard of. I mostly stick to using www.matterhackers.com they are in California but shipping is pretty fast. They carry Colorfabb and Ultimaker filaments. -
Version 1.0
1,136 downloads
A spaceship printed and painted for my toddler who loves "wockets"! This is the gCreate rocket that can be downloaded here: http://www.gcreate.com/#!3d-model---gcreate-rocket/c1k6o Printed with Colorfabb NGen. I cut off the tip of the rocket and used a hot tool to round it off. I then used a lot (maybe too much) XTC 3D to smooth the layer lines and add strength to the print. Finally used some shiny metallic paint and a layer of shellac to seal the deal. -
-
Bondtech QR Ultimaker 2 + firmware?
joelmongeon replied to joelmongeon's topic in Third party products & modifications
I'm really impressed with how well it works. I have not tried the UM2+ feeder as I already had the Bondtech one. -
Bondtech QR Ultimaker 2 + firmware?
joelmongeon replied to joelmongeon's topic in Third party products & modifications
Just a follow up for anyone interested. Martin from Bondtech replied to me via e-mail that evening with a new firmware for my printer. It has been printing like a champ ever since! -
Bondtech QR Ultimaker 2 + firmware?
joelmongeon replied to joelmongeon's topic in Third party products & modifications
Ok, I just did a quick test with the UM2+ firmware by running through the material change option. My Bondtech feeder is now going is reverse. Would changing the E-steps to a negative number be an easy way to reverse the feeder direction? So instead of setting my E-Steps to M92 E492.45 I could save it as M92 E-492.45? -
I've upgraded my UM2 to a UM2+ with the upgrade kit but I kept my Bondtech extruder instead of using the new feeder. I went ahead and updated the firmware to UM2+ like the instructions said and then realised that on my UM2 I had installed a custom firmware form Bondtech. Is there a firmware from Bondtech for the UM2+? Or just use the UM2 firmware that is on their site? I'm itching to start printing but don't want to start until I get that sorted out. Thanks in advance! Joel
-
I use Zbrush for organic sculpting but use Modo for all other 3d tasks. www.luxology.com There is a cheap indie version you can buy on steam that has most of the functionality of the full program. One ofor the best tools inside of Modo is a plug-in called meshfusion. A subdivision modeling boolean tool that is editable and spits out clean watertight meshes. Watch the video to see it in action.
-
I just bought a used food dehydrator for this purpose. I dried out some old brittle pla but have yet to test it out yet. I'll print with our today and report back.
-
Like the title says, I'm getting weird black lines through my prints at random layers. I put a fresh nozzle on and a new Teflon isolator but I still got a line on my print. Any ideas? I've got a 3dsolex i2k insulator installed, could it be that degrading or something? I'm also using a Bondtech QR extruder instead of stock. Filament is pretty new pla from Push Plastics.
-
Where to buy UM2 PTFE Hot End Isolation Coupler?
joelmongeon replied to EastUm2's topic in UltiMaker 3D printers
I bought 2.85 from gr5 store. I've had it on my printer for at least 200 hrs by now. No problems yet. You could also order from http://fbrc8.com/ they are the official us assembly and support site. I've ordered from both companies and services have been great with both. -
I just got a food dehydrator to try and rejuvenate old filament. I haven 't tried it yet on filament but I did give it a go with some old desiccant packs and it completely dried them out in about 6 hours. I'll report back when I have time to try it on filament itself.
-
Upgrade your Ultimaker 2 with the Extrusion upgrade
joelmongeon replied to SandervG's topic in UltiMaker 3D printers
I'm so mad right now. I just spent $500 on my "+" sticker not two weeks ago! -
I really like esun grey pla. I usually buy from toybuilder labs as they check each spool before selling to a customer. I've yet to have a bad roll. Price is decent at about $30 a spool. They also go under the name prototype supply on amazon and do free prime shipping. The longest print I've done with it was over 50 hrs no problem.
-
Upgrade your Ultimaker 2 with the Extrusion upgrade
joelmongeon replied to SandervG's topic in UltiMaker 3D printers
Looks great. Unfortunately I just bought a bondtech extruder (which I really like) so I'll probably hold off until I can get just the print head by itself. -
Thanks Robert. Yep, that's how i realized I was missing one. I assume adding one to an older um2 (mine was bought Nov 2014) would be a good thing? Or at least, not hurt anything. Anyone know the size of the one used, or where I could buy one? Thanks.
-
Is the UM2 supposed to come with a ferrite core? I'm following the installation instructions for my new bondtech extruder and it mentions one. After removing the cover I notice mine didn't have one in the stepper cables.
-
ALL3DP review of the new Ultimaker 2+
joelmongeon replied to bulentyusuf's topic in Buying or selling your UltiMaker
I'm glad I'm not the only one who found this to be annoying. I ended up selling my printrbot and the auto leveling was definitely one of the reasons. -
Nice interview. Must start saving all of my pennies now
-
-
Upgrades complete, what to do next
joelmongeon replied to joelmongeon's topic in UltiMaker 3D printers
Just a quick thanks to everyone who replied. I'm back up and printing and things are looking fantastic! Here is my first test with a .25mm nozzle on my Olsson block. I added the cooling duct but have yet to actually solder the new fan into place. My UM2 is in the garage so noise isn't really an issue. I've got it as a backup for now.