herman-wouters

Thanks for your understanding. The thickness of the walls are 2,5mm The x-ray shows only a few small red things but not in the problem area. I validated the object. No problems

I am sorry, I missede the answers becouse I could not find back my Question. See my reply to DaHai8

sorry, I could not find my issue back (posted in the wrong subject I suppose. The Weird thing is that if I rotate my object,it shows theprevious not showed layers, but don't show the layers which were there in the other position.

do not undersand why my object is sliced differend from what I designed[/media]. In the solid view everything seems OK. (see printscreens) any idea what the problem can be ?

I do not undersand why my object is sliced differend from what I designed. In the solid view everything seems OK. (see printscreens) Has anyone some idee about this problem ?

OK Thanks DiedierKlein

I have a "heater error problem" since I installed the Ollson heating block. I noticed that the sensor could not be fastend any more in the Olsson heating block. Even if I putsomealu-foliearound the sensor, it will loosen again after a while. With my Ultimmaker 2 extended igot a spare sensor with cable delivered. This sensor looks mutch thicker and sticks in the heater the right way. my question is how to replace the sensor and cable in the machine ????

Ihave the same problemsince I installed the Ollson heating block. I noticed that the sensor could not be fastend any more in the Olsson heating block. Even if I putsomealu-foliearound the sensor, it will loosen again after a while. With my Ultimmaker 2 extended igot a spare sensor with cable delivered. This sensor looks mutch thickernand sticks in the heater the right way. my question is how to replkace the sensor and cable in the machine ????

The strange thing is that when I set shell thicknes 4 times the nozzle size, the layers re showing on the bottom

The strange thing is that when I set shell thicknes 4 times the nozzle size, the layers re showing on the bottom

OK how do I insert the STL file?

OK Thanks

The first layer is also not showing the bottom

OK thanks, The wall is alright now. But what about the bottom ? The bottom is still not showing (0,5 mm thick) ( see pictures [/media][/media]

OK thanks, The wall is alright now. But what about the bottom ? The bottom is still not showing (0,5 mm thick) ( see pictures

Ok Iupdated my profile. I am from The Netherlands

scale is not possible because I used thet total measurement of the machine. I made the wall 0.5 mm and that the wall shows on the layerview. but still the bottom is not showing (0,5 mm thick

OK

the wals and the bottom are 0,4 mm

Hallo Nalath, thanks for yor reply See the x-ray picture. There are no red fields in the missing parts

I have a Ultimaker 2 extended and use cura 15.04 In cura the normal view gives the same picture as my 3d design, but in the layer view there are missing some parts. See the next pictures. [/media][/media] the bottom and the left wall do not show in the layerview. The wall and the bottom I designd as a support for printing: thickness 0,4 mm. When I make the wall and the bottom 1 mm, only the waal shows in the layerview. Please help me. What am I doing wrong ?

There are no endstops on the right site of the Ultimaker 2 extended. why is this ?

Problem solved !! Thanks to a member on the Curaforum. He saw on my picture of the elektronics that I did not change a resistor 47K from my old motherboard to my new motherboard. So I changed the transistor AND MY ULTIMAKER ORIGINAL WITH "PRUSA" HEATED BED IS WORKING PERFECT AGAIN. Thanks all for your help