Jump to content

zaxis3dprinting

Dormant
  • Posts

    10
  • Joined

  • Last visited

Posts posted by zaxis3dprinting

  1. You need to include a picture of the basic page.

    If you remove the floor section under the stairs the the infill will support them. It also looks like you need to increase the top/bottom thickness. 6-8 times the layer height.

    Hi labern, The top and bottom thickness are .8 The fans are on 100%

    It looks like you may be right about the T/B thickness, I am doing another print with a thickness of 1.2mm and the quality is a lot better, but I didn't add the stair (unfortunately). I will print that later and if it comes out ok I'll just drop it into place.

    Old vs New huge improvement...

    IMG_0741.thumb.JPG.a83e7010988d2b38292594c98961b72d.JPG

    IMG_0740.thumb.JPG.de19d6eeb3e150a1d4d5da933ca99484.JPG

    IMG_0741.thumb.JPG.a83e7010988d2b38292594c98961b72d.JPG

    IMG_0740.thumb.JPG.de19d6eeb3e150a1d4d5da933ca99484.JPG

    • Like 1
  2. I am trying to print a floor plan of a building I designed, I have a somewhat circular stair going up a central wall and enclosed within 3 walls. I drew all the steps and risers going up to the next floor. The spaces under the stairs are empty.

    The first time I tried printing the plan I got only the steps (no risers) and they were stringy and not solid at all (I did not specify supports).

    The second time I printed only the stairs and the central wall and enclosed them within 3 walls (under the outer edge of the steps and risers) and with supports, same problem, no risers and stringy steps.

    Can someone please advise how stairs should be created for 3d printing, if hollow underneath or solid?

    I'm using PLA and temperature is 210, pics and parameters are posted. Thanks for any help.

    IMG_0732.thumb.JPG.2db8c7dcffed2fea895a09b553eae3a7.JPG

    IMG_0733.thumb.JPG.4b4c9b455a2a6163d589e946b760d451.JPG

    IMG_0734.thumb.JPG.80682736325f89f0ff14b6125a2eae88.JPG

    IMG_0735.thumb.JPG.29d900347713b21b191c07bce09670df.JPG

    IMG_0736.thumb.JPG.df69043ca5fc8af3fef89e30ac2d9b02.JPG

    IMG_0737.thumb.JPG.385cb326c043576dd839081510b75e34.JPG

    IMG_0732.thumb.JPG.2db8c7dcffed2fea895a09b553eae3a7.JPG

    IMG_0733.thumb.JPG.4b4c9b455a2a6163d589e946b760d451.JPG

    IMG_0734.thumb.JPG.80682736325f89f0ff14b6125a2eae88.JPG

    IMG_0735.thumb.JPG.29d900347713b21b191c07bce09670df.JPG

    IMG_0736.thumb.JPG.df69043ca5fc8af3fef89e30ac2d9b02.JPG

    IMG_0737.thumb.JPG.385cb326c043576dd839081510b75e34.JPG

  3. Hello Moderator,

    I have looked everywhere on the Ultimaker website and I cannot find any information on how to be an Ultimaker reseller. I happen to have a 3d printing company in a country where 3d printing is in its infancy and I would like to become Ultimaker's exclusive agent in Beirut, Lebanon. Can you give me a contact information?

    George Zaidan

     

  4. Hello,

    my 3d printing company is located in Beirut, Lebanon. I would appreciate it if there is anyone out there that can steer me in the right direction in whom to contact about becoming an Ultimaker Reseller.

    Thanks much,

    George

     

  5. 4 more inches in height may be ideal for some models, remember also that the length of the object can be printed as the height simply by rotating the object. The depth and width of the UM2 Extended are equal to the UM2. I was very excited about the larger size when I saw it at Dynamism (I am in the process of buying a second UM2) but when I came to the realization that the height was the only thing that was increased I felt less impressed to get it as a second printer. Now to tell you the truth, if it was my first printer that is what I would have gotten, delivery date is in April, I can't wait that long anyway. Lastly, I am very happy with my UM2 and Dynamism. Good luck

     

  6. Hello, I have been told that to use my credit card I have to have my home address and shipping destination address on my credit card to get approval My credit card has my home address but not shipping address. I need to have my printer shipped to Beirut, Lebanon. Does anyone else have any experience about buying and shipping that they can guide me through? I have also been told that buying the Ultimaker 2 and shipping to Beirut is okay. Thanks for any help.

     

×
×
  • Create New...