Jump to content

sam-bianchi-bazzi

Dormant
  • Posts

    26
  • Joined

  • Last visited

    Never

Everything posted by sam-bianchi-bazzi

  1. Ciao a tutti! Apro questo thread per tutti gli Ultimakers Italiani che vogliono pubblicare le loro migliori stampe realizzate! Scrivete anche il materiale / impostazioni di stampe e magari anche il file di provenienza Sam
  2. Grazie Personal Drones! Non so chi sei esattamente ma ringrazio molto per il feedback!
  3. Ciao Ueuezaza! Ti ho risposto questo pomeriggio Con anche il materiale consigliato. Sam
  4. Ciao a tutti, Sono Sam di Creatr. Noi rivendiamo il PLA / PHA della Colorfabb in quanto lo riteniamo come miglior materiale per le nostre stampanti 3D. Voi cosa ne pensate? Per chi fosse interessato qui potete acquistarlo: http://shop.creatr.it/it/13-pla Attendo vostri pareri sulle vostre esperienze. Sam
  5. Innanzitutto controlla che la testa può comunque toccare gli endstop che è il primo requisito. Cosa vuol dire partire dal centro? La stampante deve sempre andare in posizione home prima della stampa quindi verifica innanzitutto che quello è possibile
  6. Hello Everyone! It's great to have such an amazing response for our dual extruder These a little bad news in this update: the company who was supposed to make hopefully the final prototype before production had some issues and didn't managhe to make the new parts. They said it will be ready next week - so that's some good news! Keep checking this forum thread as we'll be releasing a video of our dual extruder in action very soon. Sam
  7. Ciao Matteo, Grazie tanto per la review. La nostra intenzione è sempre stata quella di avere clienti sempre contenti in seguito ai loro acquisti presso il nostro shop! Sam #CreatrTeam
  8. Sure you can do that but using slic3r as software. There you can define which extruder does infil / perimetres / support material and support interface
  9. Just wait a little more and see what our extruder kit can do! PS. We should have news later this week...
  10. Ciao Gionny! Non so se hai già preso la stampante ma se ti interessa noi siamo rivenditori ufficiali Ultimaker, Sharebot, ColorFabb e Poly3D. Dai un'occhiata al nostro sito: http://www.shop.creatr.it oppure visto che non sei troppo lontano vieni a trovarci a Lecco nel Creatr Point. Buona giornata. Sam
  11. Ciao a tutti! Per chi fosse interessato alle UM noi siamo rivenditori ufficiali in Italia. Abbiamo un negozio online: http://www.shop.creatr.it e un negozio a Lecco. Abbiamo tutte le stampanti in pronta consegna, offriamo un corso gratuito e la spedizione in Italia inclusa nel prezzo! Date un'occhiata e suggerite a chi avesse bisogno Grazie Sam
  12. Ciao a tutti, Noi siamo rivenditori ufficiali Ultimaker. Per chi fosse interessato date un'occhiata al http://www.shop.creatr.it. Abbiamo le stampanti in pronta consegna, offiamo un corso gratuito e la spedizione in italia inclusa nel prezzo!! Rivendiamo anche filamenti ColorFabb e Poly3D (i migliori in commercio) A presto. Sam
  13. Ciao a tutti! Segnalo anche http://www.shop.creatr.it .Qui trovi i ottimi filamenti tra cui; PLA / PHA e XT della ColorFabb ABS+ e HIPS+ della Poly3D. Abbiamo appositamente selezionato i migliori filamenti in modo da non avere problemi di stampa traducendosi in ottimi risultati! Ci sono anche i http://shop.creatr.it/it/16-filamento ovvero tanti filamenti diversi da 200g ognuno. Cosi hai tanti materiali diversi a una bassa spesa. Sam
  14. Ciao Phil, Per quale motivo vorresti aumentare la retraction ad un valore cosi elevato? Rischieresti di avere problemi di consumo del filo e non risolveresti il problema dell'oozing. Comunque da Cura si può modificare se imposti la tua UM come una nuova stampante e metti tu manualmente tutti i settaggi come volume di stampa ecc. In alternativa dallo schermo LCD puoi modificare la retraction speed. Fammi sapere. Sam
  15. Ciao Beatsking, Mi dispiace per il problema! Ho letto il messaggio piu volte ma mi pare molto strano. Se ti interessa noi siamo rivenditori ufficiali UM e offriamo anche le riparazioni. Ci trovi online su www.shop.creatr.it ma abbiamo aperto anche un negozio a Lecco. Fammi sapere se hai bisogno. Sam
  16. A clogged nozzle would be fixed in the same way a clogged nozzle would be. We have no problems if users take our hot end to pieces. No worrenty is voided for that! Regarding closed or open source we'll see Maybe all the users can convice us to take the decision to go open source.
  17. I see many of you are of open source nature and would like our project to be so, too. I will discuss it with the team and give you an update! All the users responses are great! We'll keep you posted on updates on it. Regarding printing PLA. We have not released it yet mainly for that reason. We're getting better and better results with each version and we think we have almost figured that problem out. Keep checking this thread Sam
  18. Exactly, we're still having some jamming issues when printing PLA. But we're pretty sure the next version of it will solve this issue The dual extruder cannot reach the same build volume while using both extruders, however we're really proud to say that the extruders have a centre-to-centre distance of just 18mm. So the build volume in the x direction will not be significantly reduced. However when using in single extruder mode you will be able to reach the stock build volume. We have been prioritizing soluble support material: in particular ABS+HIPS but we're working hard on other combinations too! We're getting our first results in multimaterial parts but still requires huge software upgrades. Same with multi-nozzle diametre. Not it won't since we would we devastated if all our hard work would be copied and sold in cheap-crappy low cost versions. The nozzles will be compatible with E3D nozzles since they use same thread size. No exploded view drawings since they are proprietary. More photos and videos are coming We're reusing the top, middle and bottom bracket, fans. Rest will be changed. Price is to be defined but around €250. Including optimized feeder to greatly limit under-extrusion. Yep, poycarbonate too! Same sidemounted twin fan, just a different bracket. Yes in that photo we did not mount the bracket and fans since we were testing with ABS and HIPS. Yep Quick note: proud resellers! Photos and videos coming soon. Right with PLA. Great news about UM2 firmware in next Cura release. Guess you'll have to wait and see
  19. Hello, If anyone in interested in a dual extruder upgrade for both UM Original and UM 2 here is the link for anothe rpost on this forum http://umforum.ultimaker.com/index.php?/topic/8390-ultimaker-2-dual-extruder-upgrade-creatr-xlabs/
  20. Yep, we're making the official video of it. We'll upload it as soon as possible!
  21. Hello everyone! My name is Sam and I'm the owner of Creatr, an italian start-up in 3D printing. We are official resellers of UM in Italy and love them! We too have been waiting a lot for the UM2 dual extruder kit but finally decided to design our own! And today we're presenting the UltiMaker Dual extruder upgrade kit from Creatr! This upgrade is for both UM 2 and UM original. It's really simple two mount and has all the components included. Here are some photos of it: The kit is its final testing phase and will hopefully be ready before Christmas You can have more details here:http://creatr.it/2UM2 or email at hello@creatr.it -- TECHNICAL PART: We're really proud of what we have managed to achieve. The kit is all in alluminium for best heat transfer and cooling. Nozzles are in bronze and optimized to reduce retraction blobs. Since it is full metal this kit can print also special filaments like policarbonate and High temperature resistent materials (we've reach stable operating temperatures in excess of 350°C with termocouples)! Included in the kit will be an easy to follow guide on how to upgrade the firmware to fully support this. PS The photos was when we where printing with ABS and HIPS so we did not need any fans. The kit has also two sidemounted fans to cool the part (when needed) Let us know what you think and if you would like to pre-order it! Best. Sam
  22. Ciao Micro, Grazie per il supporto! Io faccio entrambi. Infatti all'acquisto di una stampante offro il corso gratuito e la spedizione gratuita. Inoltre offro corsi e workshop per diventare dei bravi MAKER!
  23. I had the same problem. Just disconnect power supply. That works!
  24. Ciao! Ho visto che parlate di problemi con la retraction. Io sono il fondatore di http://www.shop.creatr.it: una start-up italiana nel mondo delle stampanti 3D. Noi stiamo sviluppando un upgrade per Ultimaker 2. Si tratta di un doppio estrusore completamente in alluminio e ugelli in bronzo. Ci siamo concentrati su ottimizzare la zona calda, limitandola il piu possibile. Il risultato è che i blobs causati da una retraction inefficace sono quasi scomparsi del tutto! In questo momento non è ancora disponibile alla vendita in quanto stiamo ultimando i test in modo da lanciare un prodotto finito davvero ottimo. Tra qualche settimana daremo 10 kit gratis per finalizzare il testing e avere piu opinioni. Se vi interessa scrivetemi direttamente a sam@creatr.it cosi ti posso mandare qualche foto e informazione in piu. Un saluto. Sam
  25. Ciao Francesco, Io sono il titolare di Creatr: una start-up italiana nel mondo della stampa 3D. Se ti interessa noi siamo rivenditori ufficiali di Ultimaker in Italia. Questo è il http://www.shop.creatr.it. Tieni presente che all'acquisto di una stampante noi offriamo il corso gratuito e la spedizione inclusa in tutta Italia! Se sei nella zona di Lecco puoi venire a vedere la nostra ShowRoom al Creatr Point e vedere cosa si può effettivamente fare con queste fantastiche stampanti! Fammi sapere. Sam
×
×
  • Create New...