Jump to content

gizmo999

Dormant
  • Posts

    66
  • Joined

  • Last visited

Everything posted by gizmo999

  1. my problem solved by buying a new power brick also👍
  2. uiteindelijk toch een nieuwe power brick besteld omdat tijdens het printen de leds af en toe aan het knipperen was en nu geen enkel pribleem meer 😀
  3. Goed .. even een update ik heb voor een dikke week de stroom van de printer gehad . Sinds vandaag een aantal uren geprint zonder uitval . Enigste verschil is dat ik vandaag geprint heb met cura ipv simplify 3d..mischien dat dit nog uitmaakt . In ieder geval wel vreemd ..zal later nog proberen met simplify om te kijken of dit nog uitmaakt .
  4. Bedankt !! ga idd de leds even uitzetten de draden maken verder geen sluiting ...maar ik had zelf ook al wel het idee dat het mischien aan de voeding kan liggen. Ik ga het nog even verder onderzoeken en laat nhet nog wel even weten.
  5. Goedenavond , Ik heb sinds vanavond een probleem dat mijn printer crashed …...ik start een willekeurig printje(al meerdere geprobeerd) het bed verwarmd netjes en extruder ook vervolgens begint hij te printen en tijdens het printen gaat hij opnieuw opstarten . Het lijkt net of er op dat moment sluiting in zit oid . Alle stekkers zitten er goed in het enigste wat mij opvalt is dat de led verlichting een beetje knipperd/resoneerd laatste tijd , het ledje op de voeding blijft overigens wel branden Het is een um2 plus uit eind 2016 print met simplify 3d en cura . Was benieuwd of iemand hier ook al eens last van had of een idee had wat dat kon zijn .
  6. I,m having the same thing !...its printing for a few seconds ...then the printer restarts suddenly . Its a um2+ 2016 Does anybody know whats wrong ?
  7. Hoi ik heb een ultimaker 2+ van 1 mnd oud in de aanbieding ga deze wegdoen ivm starten eigen zaak . Heb m verder nog niet officieel in de verkoop maar mocht je hier belang bij hebben hoor ik het wel m.v.g. G.Gezel
  8. Version 1.0

    1,668 downloads

    So i didnt like the cardbox version of my nozzle box so i made a new one ,and i like to share it with you .
  9. yes but if you have the Original file for it i still want that
  10. looking good ! Always handy to have them i think
  11. Does anybody has a stl or the dimensions of the new axis alignment tools wat comes with the extrusion upgrade kit ? i want to use the tools to hold the axes firm when doin a cold pull
  12. Will the prices drop for the um2+ and um2 go etc. when the ultimaker 3 arrivés?
  13. Yes i know that is an option, but was curious if there was an permanent solution in the firmware using this builder afterwards:)
  14. Hi Amedee,is there a way when using the builder to adjust the motor current on the umo+?. I mean is there a way to edit that hex file ? or can it be added to the builder
  15. I know what you mean ,so its working better i can adjust it and no splatter into the filament. thanks for that . But still different with cura ,i like the head and bed movement at same time ,do jou know what i mean . its not a big deal but like it more
  16. Ok so in the picture im seeing also layer height ,ihave managed to download the firmware with Firefox but im not seeing the layer height in my display when printing. How can i manage that? really like that:)
  17. Ok i give up ive just downloaded the firmware from github works better for me . Thanks anyway
  18. i made a copy from the the start and endcode from my cura and paste but still not the way i want
×
×
  • Create New...