Jump to content

garenc

Member
  • Posts

    15
  • Joined

  • Last visited

Everything posted by garenc

  1. Je vois que c'est la pièce qui vient chevaucher le bras...c'est celle-là qui reprend la vis de serrage n'est-ce pas ? J'ai vu aussi un guide pour le filament souple à monter dessus. Tu as essayé ?
  2. salut Didier, j'ai vu cet extrudeur d'IRobert. Je ne comprend pas bien la nuance dans les fichiers yoke&hub 35, 36, 37, 38mm. Merci d'avance !
  3. Hello, I would like to know if you know, how filament have to be grinded by the extruder wheel ? Mine looks like tire tracks in the bowden tube. Does hexa-screw set on the top of the extruder help to increase or descrease pressure on the filament ? Other question : How do you deal with the noise done by filament echoing on the back of the machine ? When I touch it, it stops then go on again. It's boring for long prints. THX a lot, Sacred community
  4. Les poulies desserrées...oui. Merci encore
  5. Merci à tous, ç'est reparti d'équerre. Thx for your support
  6. La tête bouge avec résistance régulière. Plutôt normale...
  7. Bonjour Didier, Meilleurs vœux. J'ai rien fait encore. Les courroies X & Y semblent bien tendues sur la U2. Autre info, ça couinait un peu pendant les impressions par moment, genre strident.
  8. Bonjour, Avez-vous déjà corrigé ce phénomène : Les côtés de l'objet se décalent petit à petit pour finir vraiment à l'oblique, penchés et déformés. Have you ever deal with leaning prints problems ? I've seen here http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide#leaning that I've to check Pulleys on stepper motors and look that there's no friction on machine frame... Any other advice ?
  9. Very Usefull Job ! THX a lot... Actually, problem was in pcb temp wire connection. Have a great day
  10. C'est le TEMP sensor non, je n'ai rien démonté encore
  11. Hello I've found 3 topics about this bug ERROR - STOPPED - Temp Sensor (Machine coming back from technical center) - Troubleshooting - Official Ultimaker User Forum ERROR-STOPPED TEMP SENSOR - Troubleshooting - Official Ultimaker User Forum Ultimaker 2 -error temp sensor- - Troubleshooting - Official Ultimaker User Forum I've send a ticket to support service... Is there anyone that has resolved alone ( without sending back the machine ) this problem ? I've seen that I've to check connection on PCB... and also on the Nozzle head but where ? Is it easy to change failed part in the head ? THX by advance
  12. Bonjour Hello J'ai trouvé 3 sujets à propos de ce bug I've found 3 topics about this bug http://umforum.ultimaker.com/index.php?/topic/6150-error-stopped-temp-sensor-machine-coming-back-from-technical-center/ http://umforum.ultimaker.com/index.php?/topic/8383-error-stopped-temp-sensor/?hl=%2Btemp+%2Berror http://umforum.ultimaker.com/index.php?/topic/3851-ultimaker-2-error-temp-sensor/ I've send a ticket to support service... Is there anyone that has resolved alone ( without sending back the machine ) this problem ? I've seen that I've to check connection on PCB... and also on the Nozzle head but where ? Is it easy to change failed part in the head ? THX by advance
  13. Pause at Height semblait actvitée...
  14. Merci Didier, je vais déjà vérifier ça.
  15. Bonjour, Utilisateur depuis peu de la U2, je rencontre plusieurs fois le même problème après un reset aux paramètres usine entre autres : après avoir atteint à peu près 1 cm., l'impression se met en pause et attend un clic bouton pour repartir... Savez-vous d'où peut venir ce problème ? J'utilise CURA, dernière version. Merci d'avance U2 user since few weeks, I've got a strange problem with pause. After printing something like one centimeter high, printer is pausing. I haven't notice it first but after a reseting, it appears several time. Do you know why ?
×
×
  • Create New...