Jump to content


  • Content Count

  • Joined

  • Last visited


Community Reputation

0 Neutral
  1. Problem already solved, thank you all the same.
  2. Hello, everyone. I am trying to used curaengine to generate a gcode. OS win8 pro; compiler visual studio 2010; I found when I use debug way to compile the program, it always went wrong. The command line window stopped at wrote layers. And then a warning dialog show that vector subscript out of range. I understand this usually comes with an improper setting of vector, but don't know where. Has anyone ever met with the same problem with me? I will appreciate it if you can give me some instruction and thank you very much.
  3. Hello,everyone. I am a newbie to curaengine. I taped the this to the command line: curatest -v -o d://test.gcode d://test.stl and here are the results: Default config 'default.cfg' not used Loading d://test.stl from disk... Loaded from disk in 0.031s Analyzing and optimizing model... Face counts: 900 -> 900 100.0% Vertex counts: 2700 -> 440 16.3% Size: 50.800000 47.938000 3.175000 vMin: 77.100000 78.531000 0.000000 vMax: 127.900000 126.469000 3.175000 vMin: -25.400000 -23.969000 0.000000 vMax: 25.400000 23.969000 3.175000 Matrix: 1.000000 0.000000 0.000000 Matrix: 0.000000 1.000000 0.000000 Matrix: 0.000000 0.000000 1.000000 Optimize model 0.016s Slicing model... Layer count: 30 Sliced model in 0.016s Generating support map... Generating layer parts... Generated layer parts in 0.015s Generated inset in 0.016s Generated up/down skin in 0.109s Wrote layers in 0.00s. Total time elapsed 0.20s. Print time: 0 Filament: 0 Filament2: 0 Obviously the layerthickness can be read, but why it shows that default config not used? And the gcode I got is not complete either. ;Generated with Cura_SteamEngine DEV M109 S210 ;Heatup to 210C G21 ;metric values G90 ;absolute positioning G28 ;Home G1 Z15.0 F300 ;move the platform down 15mm G92 E0 ;zero the extruded length G1 F200 E5 ;extrude 5mm of feed stock G92 E0 ;zero the extruded length again ;Layer count: 30 ;LAYER:0 M127 T0 G0 F9000 X70.800 Y72.231 Z0.300 ;LAYER:1 M126 T0 ; value = 127 ;LAYER:2 M126 T0 ; value = 255 ;LAYER:3 ;LAYER:4 ;LAYER:5 ;LAYER:6 ;LAYER:7 ;LAYER:8 ;LAYER:9 ;LAYER:10 ;LAYER:11 ;LAYER:12 ;LAYER:13 ;LAYER:14 ;LAYER:15 ;LAYER:16 ;LAYER:17 ;LAYER:18 ;LAYER:19 ;LAYER:20 ;LAYER:21 ;LAYER:22 ;LAYER:23 ;LAYER:24 ;LAYER:25 ;LAYER:26 ;LAYER:27 ;LAYER:28 ;LAYER:29 M127 T0 G1 F2700 E-4.50000 G0 F9000 X70.800 Y72.231 Z8.175 M104 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way M84 ;steppers off G90 ;absolute positioning I pondered the error must be the readsettings function in setting.cpp, which is a paradox due to the layerthickness item. Can anyone tell me where I went wrong and how to write my own config files? Thank you very muck.
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!