Jump to content
Ultimaker Community of 3D Printing Experts

long-pham

Dormant
  • Posts

    3
  • Joined

  • Last visited

    Never

long-pham's Achievements

0

Reputation

  1. I also have the same problem. I think my thermocouple sensor is broken now when the ceramic part is broken into pieces. I am asking people which one I should order or how can I order from Ultimaker but got no answers so far.
  2. https://drive.google.com/open?id=0B3lKVhr9MK6KSzdQRnVVZkJGR2dfVk5xc0NCTUoyaDNWTGJJ&authuser=0 Hi guys, I have problem with the Ultimaker Original Thermocouple sensor. First the temperature showed in cura was "operational temperature: 0". I tried all the best unplug and plug in the wire to the port on the board but the result did not change. So, I decided to remove the couple from the heating unit to see what wrong in there. I found the mesh jacket a little tear off. Then I try to pull out the sensor a little from the metal cover, then the ceramic came out broken into pieces. Did I do something wrong? How can I fix this? Thanks a lot for your kind advice.
×
×
  • Create New...