long-pham
-
Posts
3 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by long-pham
-
-
I also have the same problem. I think my thermocouple sensor is broken now when the ceramic part is broken into pieces. I am asking people which one I should order or how can I order from Ultimaker but got no answers so far.
-
https://drive.google.com/open?id=0B3lKVhr9MK6KSzdQRnVVZkJGR2dfVk5xc0NCTUoyaDNWTGJJ&authuser=0
Hi guys,
I have problem with the Ultimaker Original Thermocouple sensor.
First the temperature showed in cura was "operational temperature: 0". I tried all the best unplug and plug in the wire to the port on the board but the result did not change. So, I decided to remove the couple from the heating unit to see what wrong in there. I found the mesh jacket a little tear off. Then I try to pull out the sensor a little from the metal cover, then the ceramic came out broken into pieces.
Did I do something wrong? How can I fix this?
Thanks a lot for your kind advice.
Ultimaker 1 spare parts & UltiController for sale
in Buying or selling your UltiMaker
Posted
Can I order the thermocouple sensors only?