-
Posts
4,788 -
Joined
-
Last visited
-
Days Won
94
Content Type
Forums
Events
3D Prints
3D Print posted by neotko
-
Beyond UMO - UM2 Slideblocks
Fast-Swap Slideblocks to move from UMO to UM2 and back. Supports GT2 and MXL and it's greatly based on the Step files from Ultimaker 2 github and the fantastic Twisterblocks by Chopmeister.
Main goal it's to gain some extra cm of print area on UMO+ using a full UM2 hotend.
2,142 downloads
0 comments
Updated
-
A remix of two Flowalistik great designs
Made this remix to try to win the Cult Make Conquest
Also, REALLY fun to do it, I'll post the 3D file in a few weeks. Had to use my fans at full to print the arms up, also hard to redo some polys on the R2D2 arms.
Printed and sanded very fast, I should try to paint it, that could look very nice...
By the way if you are really bored, go to
https://cults3d.com/en/makes/low-poly-r2d2-and-c3po
Hit 'like' and I might get a chance to win
909 downloads
0 comments
Updated
-
sugarpop! store Cactus
I did give up on wood filaments long ago, exactly a year ago, mainly because changing nozzles on umo hurts the aluminium block quite fast. Also because I didn't found enough cooling for the speed I wanted to use.
This it's printed with my um2fancap for umo+ (doesn't work for um2 frame) with a 0.6 nozzle at 70mm/s 0.3 layers, and retracts on (but optimized on speed and amount so the weak wood filament doesn't break).
I'm quite happy with the result specially since it takes just 1h and 10mins to print.
The flower it's printed on 2 parts, glued, and then glued with epoxy to the cactus.
1,780 downloads
0 comments
Updated
-
Skateboard
Final test before going into production. Designed by me. Printed with UMO+ MHC & Cura
Colorfabb Fluorescent Pink + Black PLA 1.75mm Temperature 198C Pink 200C Black
I went a bit short on retractions and had to do a bit of cleaning, still nothing unfixable.
https://www.youmagine.com/designs/ultimaker-original-plus-dual-extrusion-magnetic-head-changer
https://ultimaker.com/en/community/view/10657-a-different-multi-extrusion-approach-um-tool-printhead-changer
2,495 downloads
0 comments
Updated
-
Ultirobot small for Community Contest, part 1 - Second Try | The Ultibot
Printed again but this time simulating a 0.30 nozzle with the 0.4 nozzle on S3D.
Also lowered the speed from 30mm/s to 20mm/s
Printed 2 rows, one with supports and the other without.
1,684 downloads
0 comments
Updated
-
Ultirobot small for Community Contest, part 1 | The Ultibot
0.4 E3D nozzle. Ultimaker Original Plus
1,477 downloads
0 comments
Submitted
-
0 comments
Updated
-
Dual Printed with UMO+ MHC
Designed for a comercial job. First test done in cheappla (16€ / kilo).
Final version will be on Colorfabb PLA+Wood
Printed using Cura without wipe or ooze shield. My custom walls worked quite nice but I can do them use much less material since the leak it's really small.
1,870 downloads
0 comments
Updated