Jump to content

victor

Dormant
  • Posts

    21
  • Joined

  • Last visited

victor's Achievements

0

Reputation

  1. Hello fellow ultimakers, Recently i switched from PLA to ABS after 2 years. I absolutely love ABS and how you can vapour-smooth it with acetone fumes. But i have a problem that only happens with ABS. Once a print is finished somehow the filament is ground. And i have to change material to print another object. So i print something without a problem and the printhead goes back to it's corner. But when i try to print again there is no extrusion because the feeder wheel has ground into the filament. I think this is very weird because after i change the material it prints without a problem untill i print another thing. I hope you guys have a solutio for me. Kind regards, Victor
  2. I have tried it. One of the end stops seems to be not doing it's job. Its the one on the left. I have checked all the wiring and everything seems to be OK. As you can see in the video both end stops click. I think the weird part is i printed something without problem, but when wanted to print another think suddenly this problem occured https://www.youtube.com/watch?v=AVpNKQY1_2I
  3. I have tried it. It maked contact with the end stops. I can hear them both clicking. The printhead seems to be stopped by the end stop on the left, but tries to go to the back despite the fact that it touches the endstop Thanks for the replies
  4. Hello fellow ultimakers! Unfortunately i have a problem with my ultimaker 2. As you can see in the video it looks like the printhead tries to go futher in the left back corner than possible. I tried to find the problem and the only thing i could find was the end stops being bent and not touching the printhead when it's in the corner. But the printhead touches the end stops and you can hear the clicks. Unfortunately ultimaker does nog respond to me so i hope the community can help me. I'm not able to print and it's really frustrating. Big thanks, Victor https://www.youtube.com/watch?v=CxPP_0mtiGg
  5. Hallo ultimaker gebruikers. Mijn probleem is dat als ik iets uitprint, het er te klein uitkomt. Mij is verteld dat de z axis mischien stappen overslaat en dat ik moest kijken of alles in orde was. Bleek het koelingselement van de stepper motor van de z axis afgebroken te zijn. (Heb een in elkaargezette ultimaker original van print3d matter gekocht voor ong. 1600euro, dus hoe kan dit?). Ze hebben mij een nieuwe opgestuurd maar dit schijnt nu dus niet het probleem te zijn. Ik weet niet hoe ik hier fotos kan laten zien helaas. Heb begin Januari de printer gekocht en kan nog steeds niet printen.... m.v.g. Victor
  6. Not the first bottom layers, but the layers after them. So as soon as it is starting to print infill
  7. Hello, I have this problem that my extruder scrapes the print its printing. I really don't know what to do, i hope somebody can help me with this problem.
  8. victor

    PLA papje

    Ik heb een nieuwe cura gedownload, heb nu niet meer het probleemdat ik niet kan verbinden. Het bedrijf waar ik mijn printer gekocht heb heeft me een gcode gestuurd die ik heb geprint zonder problemen ( de eerste keer dat een print het voorbij 20% heeft gehaald). bed opnieuw afgesteld en ik krijg geen pla papjes meer. Het enige probleem wat ik nu nog heb is dat mijn extruder schuurt tegen de print die hij aan het printen is. Dit probleem blijf ik hebben temperatuur of laagdikte blijkt niets uit te maken.
  9. victor

    PLA papje

    Mijn buurman komt zometeen ff langs met een schuifmaat. Ik probeer de firmware opnieuw te instaleren maar nu staat er dat ik niet kan connecten. (failed to establish connection with the printer.) (please connect the printer to your computer with the USB cable.) Ik gebruik geen komma's, en ik heb alles van 0.02 tot 2 geprobeerd. ....................... (-...-)
  10. victor

    PLA papje

    Ik heb de flow op 100 en 80% geprobeerd ik krijg bij beide hetzelfde probleem. Hier heb ik nog een filmpje ( krijg ze helaas niet scherper ). In deze printsessie probeer ik de ultimaker robot te printen. Ik heb hem vroegtijdig moeten stoppen omdat de extruder ging schrapen. Zoals je in het filmpje (hopelijk) ziet zie je dat de rechter achterkant een zooitje is. Op de plaatjes ( die in in het filmpje geplakt heb) zie je de resultaten. Op het eerste en laatste plaatje zie je geprobeerde ultimaker robots, die ik allemaal vroegtijdig heb moeten stoppen. https://www.youtube.com/watch?v=niELvt-VFSo
  11. victor

    PLA papje

    Helaas moet ik die datum werken, Ik ben al wel wat verder, de infill gaat goed daar schrapt die extruder niet overheen en heb ik ook geen overextrusion. Op een of andere vage manier doet hij dat nu alleen bij de 'outlines'. Dus de binnenkant van de print gaat goed alleen de buitenkant niet..
  12. victor

    PLA papje

    Weet iemand wat een goede z-steps per mm is voor de ultiamker original?
  13. victor

    PLA papje

    Hallo sorry voor de late reactie ik heb het erg druk gehad, Wat houd stepper drivers precies in? (a-technisch). De maat klopt als ik het bed 10x 10mm laat zakken. Ik heb alles opnieuw gedowload en alles gereset, ik het begin doet alles het prima maar na een paar lagen blijft de spuitmond schrapen. Ik snap er helemaal niets meer van ik begin langzamerhand spijt te krijgen dat ik zoveel geld heb uitgegeven voor zoveel kopzorgen...
×
×
  • Create New...