jeson

After printing and starting a new print, no changes made what so ever to the printer, not even changed the material, the printer started to print on the right hand side of the table instead of on the left hand side where I had put the object. It also made a lot of noise when moving the head to the farthest right hand side. I did a factory reset and updated the firmware through Cura, but the problem remains. I tried to print but found that the table is now in a lower position than it should. Any hints?

Thanks for the help. My problem still remains, though. The empty space witin the tube gets filled with support structure that I do not want.

I have a question related to this (also somewhat of a rookie on this). I am trying to print the simplest tube you can imagine. When slicing it in Cura i see support plastic in the whole of the tube making in useless. I can not find any way in Cura to turn this off. I have unchecked "Generate support". Any hints highly appreciated. UM2_jordankare.3mf

My deafult brim setting in Cura is 20, so I guess that should be fine?

Tried to attach some pictures of my print-out to my reply, but I didn't make it. Any hints?

Hi, Thanks for the input. I'll fiddle around with your hints, but my outstanding question remains; where do you set the bed temp of the UM"? Regards, Johan

Hi, Being a beginner with 3D printers, please bare with me. I've just purchased an UM2 and have made my first couple of printouts. When trying to print a bigger part with a base plate I got a warping problem with two corners lifting. I am using the PLA that came with the machine. Reading the troubleshooter made me understand that I ought to increase the temperature on the bed. I am not able to figure out how to do that, though. Can anyone gice me some hints? Regards, Johan