Jump to content

neo-ninja

Member
 View Profile  See their activity

  • Posts

    184

  • Joined

  • Last visited

 Content Type 

Posts posted by neo-ninja

    Ultimaker 3 Extruder 2 not taking in filament

    in UltiMaker 3D printers

    Posted

    Hey Guys,

    I have a really strange issue. 

     

    My UM3 second extruder will not load filament or move filament up it always pushes filment out. Even when i go to "move filament", no matter which way i turn the dial it always pushes filament down. Its very strange and I cant work out why....

     

    I opened up the feeder box and there isnt any issues in there its all clean etc.. 

     

    Anyone have any ideas?

    Nozzle Settings new Cura on UM2 Machine

    in Improve your 3D prints

    Posted

    Hey Guys,

     

    I havent really ever had a need to change my nozzle size before. However recently i have been doing alot of basic block prints (and facemasks) so figured i would swap my 0.4 to a 0.8.

     

    I was assuming in Cura i would easily change a setting and it would update all the minor settings but i cant seem to find that. I have changed the layer width but I feel after a test print im going to need to change a whole bunch of other settings from wall thickness to other stuff. 

     

    Am i missing something? WHat settings do people normally change?

    ER18 and ER19 Issues UM3

    in Improve your 3D prints

    Posted

    Hey Guys,

     

    On one of my UM3 machines i started getting ER18 issues, so i did what i had to do for another machine - reseated the cable, made sure the white cable was pulled down, used a shim etc.. that has always previously worked fine on some of my other machines.

     

    But it still didnt fix the issue, so i ordered a new cable and just installed that but im still getting the same issues. 

     

    What else can I try?

×
×
  • Create New...