Hi guys
I can't seem to work out whats going on here with my print. I've levelled my bed a huge amount of times so the first layer has gone down quite well but as the fill starts to go on the printer makes a rough layer over and over again.
The photos show the finished print as well as a print that has been taken off mid way through to show how it builds it up.
I've been able to get this print to a high standard before as well as on a quick speed but now my printer is loosing its quality.
Nozzle temp 210 Bed 70
first layer 20mm/s then 50mm/s
0.1 layer height with 50% fill and a nice 3 line Brim