shawngealow

Hmm, looks like the number of atomic pulls necessary to alleviate this issue was two more than I had already previously performed. Printing fine now. Hooray lessons learned. >_>;

Reibuehl - Less than 200 hours on the printer so far. Dim3nsioneer - Layer height is right at 0.1 mm. I've done a few atomic pulls. I just don't get why it's working fine for the first few passes for the brim but falls apart shortly after that (or well after, in the case of the second picture when I tried to print 3 of those items at once). I cleaned the nozzle off with a wire brush so there shouldn't be any issue with debris or filament coating the nozzle. I had printed a wiper for the filament before it goes through the feeder, though I took it out to reduce factors that could be causing this issue.

Trying to figure out what the heck is going on with my UM2. I've had several great prints, then for the last week or so, every time I try to print, I get results like these... The printer head is clean, as is the print bed. I've tried 210/60, 215/60, 220/60, 210/70, 205/60, all with the same results. I've tried different filaments (Ultimaker silver, Colorfabb black, Colorfabb gray), all with the same results. I've tried printing on blue tape and without blue tape but with stick glue on the bed. Same results. The damning thing is that I occasionally get good prints, then this happens several times in a row. Nothing seems consistent about this, and it's driving me mad.

No idea. Just showed up on my door when I got home after a doctor's appointment today.

Got my Ultimaker 2 in the mail today. Would've liked a tracking number or something, but hey, I'm just glad to have it!

That would've been me, in the comment directly above his.

I've submitted a ticket and sent an email to them and both times, I was replied to by the same person who stated that they had no shipping information for me, even though I requested a general update. I've tried putting the above number in as my order number in my profile but it doesn't seem to work in that capacity. All I want to know is what's going on with my order and what the very brief email I received today means.

Today I received an email saying that my order had been "offered to our carrier". Can I please get some information on what, exactly, that means? Also, I need an update about order 1512191. I tried emailing support but the individual could not find any information about the order, which was paid in full over a month ago with no updates since.