Jump to content

lekid

Expert
  • Posts

    669
  • Joined

  • Last visited

  • Days Won

    12

3D Print posted by lekid

  1. Game and Watch Cover

    The problem when we buying objects is that it still lacks something.

    912 downloads

       (0 reviews)

    0 comments

    Updated

  2. Goat Horns

    Last special order. 3d sculpting and 3d printing of goat horns in polypropylene. I chose this material because it's robust and lightweight. With only a 1.8mm shell, I have a weight of about 60gr for a single horn. A led system will illuminate the symbols.
     
    Print settings :

    Printer -> UM2 + Bloc Olsson + Bondtech
    Nozzle -> 0.6mm
    Material -> Centaur PP (polypropylene)
    Layerheight -> 200µm
    Shell -> 3 (1.8mm) + Top/Bottom 9 lignes (1.8mm)
    Infill -> 0%
    Temperature -> Nozzle 235° / Bed 30°
    Fan Speed -> 100%
    Speed -> 40mm/s and the 1st layer at 30mm/s
    Adhesion -> scotch
    Slicer -> Cura 3.6
    Supports -> 45° with 15% of density. I also activate the Support Interface
     
    I also did a Timelapse of the Sculpting done with ZBrush -> https://youtu.be/dFdMDAD5Z4g

    37 downloads

       (0 reviews)

    0 comments

    Submitted

  3. Bed Remote Box

    Creation of a small box for a bed remote.

    Printed in Centaur PP from Formfutura.
     
    Specs :
    Printer : UM2 + bondtech feeder + Olsson Bloc
    Material : Centaur PP (polypropylène) de Formfutura
    Nozzle : 0.6mm
    Layer Height : 300microns
    Speed : 40mm/s
    Wall : 2mm
    Supports : Everywhere at 50° and 20%
    Fan Speed : 100%
    Printing Time : 3h10

    I used brown PP scotch for the bed adhesion.

    46 downloads

       (0 reviews)

    0 comments

    Updated

  4. Asian Style Clouds

    Hi everyone
    the sun is finally back, and i sculpted asian style clouds (I miss clouds ^^)
     
    Print settings :
    Machine : UM2, bondtech feeder, Olsson bloc
    Nozzle : 1mm
    Walls : 3
    Layerheight : 200µm
    Infill : 0%
    Speed : 45mm/s
    Fan speed : 100%
    Temperature : 200° / 60°
    Bed adhesion : Supports + Brim
     
    Filament used : Colorfabb / Formfutura / SOVB3D / Biofila by Two Bears
     
    You can find the clouds stl here --> https://cults3d.com/en/users/LeKid/creations
     

    26 downloads

       (0 reviews)

    1 comment

    Submitted

  5. Cloud

    Here is a small cloud I sculpted inside ZBrush last week ;)
     
    some informations about the print :
     
    Printer : UM2 + Olsson Block + Bondtech Feeder
    Nozzle : 0.6mm
    LayerHeight : 200µm
    Wall : 3 (1.8mm)
    Top/Bottom : 6 layers (1.2mm)
    Infill : 15%
    Temp : Nozzle -> 200° / Bed -> 60°
    Speed : 55mm/s (1st layer at 35mm/s)
    Printed with the tip in the air
    Supports : 50° / 15% in density
     
    Total printing : almost 1h
     
    Concerning the sanding process, I started with a grain at 180 and then after 400 to finish at 600 (personally I do not go down in grain it's already quite smooth in 600 :)
     
    I also made a Time Lapse of the sculpting

    45 downloads

       (0 reviews)

    3 comments

    Updated

  6. Ascalon's Blade - Issei Hyodo - High School DxD

    FR : Mon frère s'étant mis au cosplay et faisant le Balance Breaker d'Issei Hyodo (High School DxD), il lui manquait la lame de l'épée Ascalon. Je lui ai donc modélisé, imprimé puis apprêté. La peinture sera finalisé par lui même. La lame fait quasiment 1m
    Lien de sa page facebook --> Hizu Cosplay <--- Link of his Facebook page
    EN : My brother began doing cosplay and did Issei Hyodo's Balance Breaker (High School DxD), he missed the blade of the sword Ascalon. So I modeled, printed and primed it. The painting will be finalized by himself. The blade is almost 1m

    864 downloads

       (0 reviews)

    0 comments

    Updated

  7. Merry Christmas all :)

    The title speaks of himself
    I wish a merry christmas to all of you!!
    PLA Formfutura Gold

    833 downloads

       (0 reviews)

    0 comments

    Updated

  8. Personnalized Teddy

    I am happy to present you a personalized teddy that I realized from A to Z and printed in ngen
    Modeled in ZBrush and printed with UM2 with Colorfabb ngen Blue.
    The teddy is in one only piece!! 72h of 3d print just for the teddy ^_^
    Lenght -> 150mm / Width -> 130mm / Height -> 180mm
    If you want to see more, I made an album with some pictures from WIP to Shooting here -> https://www.facebook.com/KevinPalluet.MIP/photos/?tab=album&album_id=1052153738243735

    1,003 downloads

       (0 reviews)

    0 comments

    Updated

  9. PokeWood

    Réalisation d'une PokeWood pour les 20ans de Pokemon.
    Modélisation sous ZBrush et Impresion 3d sur UM2 avec Feeder Bondtech et Bloc Olssen.
    Utilisation des filaments wood de Formfutura Cèdre / Ebène / Pin / Bouleau et Olive.
    -------------
    Realisation of a PokeWood for the 20 years of Pokemon.
    Modeling with ZBrush and 3d Print on UM2 with Bondtech's Feeder and Olssen Bloc.
    Easywood filaments of Formfutura Cedar / Ebony / Pin / Birch and Olive.

    1,284 downloads

       (0 reviews)

    0 comments

    Updated

  10. Reprint Train

    Here an other 3d print of the Train.
    Now it's with Easywood cedar, pine and birch from Formfutura

    1,196 downloads

       (0 reviews)

    0 comments

    Updated

  11. Japanese pagoda

    3d modeling of a One Tier Pagoda for a Lantern project with ZBrush 4r7.
    Painting :
    - Primer : MrSurfacer 1000 (airbrush)
    - Tamiya Black Semi Gloss (airbrush)
    - Tamiya Copper (airbrush)
    - Pébéo Studio Acrylics HV iridescent precious gold (hand painted)
    - Varnish Tamiya Clear (airbrush)

    653 downloads

       (0 reviews)

    0 comments

    Updated

  12. clips for rolling shutters' cache

    The original pieces was not suitable due to the external insulation of the house.
    So I enlarged the pieces and producing a small series.
    I installed the feeder of Bondtech and I put 2 times less than expected.
    Printed with PlaTec from Biofila by Two Bears

    1,000 downloads

       (0 reviews)

    0 comments

    Updated

  13. Wedding pins

    For the wedding of a friend, I had the honor to print her small 6 pins.
    The design is basically a custom stamp for their wedding by Mydearpaper and modeling of an other friend.
    I used a 0.15mm diameter nozzle.
    A layer of golden bomb was sprayed over by him.

    1,143 downloads

       (0 reviews)

    0 comments

    Updated

  14. 3D printing Mascot

    Work done for the Club Alpha - Maquettiste / Modelisme.
    I reproduce their mascot present on their logo in 3d with ZBrush and 3d printed with UM2.
    Head,Hair and Hand : 0.15mm nozzle
    Bust : 1mm nozzle
    Arms and Legs : 0.6mm nozzle

    1,324 downloads

       (0 reviews)

    0 comments

    Updated

  15. Rugby Ball Gift

    3d printing done for the daughter of a Rugbyman friend.
    Done in 4 parts with Colorfabb ngen and FormFutura HDGlass.
    Now, I know that I have to improve my paint skills with the airbrush

    1,223 downloads

       (0 reviews)

    0 comments

    Updated

  16. 3D Printing Train

    Here is a Train I made for a Birth Gift.
    78 pieces were printed.
    Here the filaments I used:
    Formfutura - 3D printer filaments EasyWooD Coconut ( 7pièces ) , Olive ( 8 pieces) , Ebony ( 49 pieces ) and Colorfabb ngen Silver Metallic ( 14 pieces).
    Modeling with Pixologic ZBrush 4R7 and the ZModeler
    Printing details:
    Slicing with Cura
    Ultimaker UM2 + Olssen Block
    EasyWooD : 1mm nozzle , layer height 0.1mm , speed 30mm/s Filling 100 %
    Ngen : Nozzle 0.4mm , 0.1mm layer height , speed 40mm/s , filling 100%

    1,534 downloads

       (0 reviews)

    0 comments

    Updated

  17. Fan Print Kashira

    Long time I didn't do some organic modeling.
    I'm a fan of Ghibli so I decided to do a Fan print of the Kashira from Spirited Away.
    Know it's time to improve organic skills and time optimization
    Sculpted in ZBrush 4r8
    Silk filament from Biofila by TwoBears

    346 downloads

       (0 reviews)

    0 comments

    Updated

  18. Chakra Blades

    *Fan Art + 3d Print Mode*
    Creation of Asuma Sarutobi's Chakra Blades with support.
    Modelling with Zbrush 4 R8 of Pixologic.
    Blades printed in PlaTec and Support with Easywood Birch from Formfutura.
    No more masking tape, painting of blades with tamiya Gun Metal and Chrome Silver with brush.

    384 downloads

       (0 reviews)

    0 comments

    Updated

  19. Velta 3D

    Hi everyone,
    I present you the mascot I modeled for the upcoming B-Velta, a delta type 3d printer made in France.
    The gcode of the mascot will be inside the futur printer
    Modeling in ZBrush.
    2 versions of the model :
    Colorfabb Ngen Silver Metallic and Octofiber Light Wood
    Total Height : 180mm
    Nozzle -> 0.6
    Wall -> 1.2
    Infill -> 20%
    B-Velta -> https://www.facebook.com/BVELTA
    My facebook page -> https://www.facebook.com/KevinPalluet.MIP

    631 downloads

       (0 reviews)

    0 comments

    Updated

×
×
  • Create New...