manuelf

You have to copy the file selectextruder.py in the folder \Cura_15.01\plugins. Then activate it the next time you open Cura.

Macua85, If you edit the "Start/End-GCode" in Cura, modifying the command M109 and adding a new line M109 T1, like this (where S255 is the temerature setting for the filament. In my case I use 225 ºC) it works perfect. ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line M109 T0 S225 ;Uncomment to add your own temperature line M109 T1 S225 G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...