Jump to content

titanservices

Dormant
  • Content Count

    5
  • Joined

  • Last visited

    Never

Everything posted by titanservices

  1. Any help? I printed an octopus twice and both prints had issues at the same layer. So I tried a shorter model. Printed the whole thing, but I had Cura set to do two models. First model went well, but the second failed in 2-3 layers. I have no idea why. Ideas?
  2. So I tightened all the screws, including the screws on the motor. But it's still happening. Happens within only 3-4 layers before it screws up.
  3. Hi, I got my Ultimaker 2 in Janurary, and have been getting good quality prints for the past 4 months. I am attending a trade show this weekend, and was invited to bring my 3d printer, so in anticipation, I have printed about 10 objects for example. Suddenly, starting yesterday, I have been having a problem where the extruder is printing just fine, and then suddenly I hear a kind of grind sound, like the belt is slipping, and the whole nozzle and everything moves to the right about 10mm. And it keeps printing like nothing happened. I have attached a photo. I was printing a vase that should be straight up. I did buy some sewing machine oil and did oil the x and y shafts, but its still bad. Any help for this newbie before my show on Friday????
  4. Great, I was looking for an option like that. The main piece does come off the heatbed. And it is heated. I will try printing with a brim.
  5. Hi, This is my first post with Ultimaker. I am fairly new to the 3d printing world. In Janurary this year I got my Ultimaker 2. I have printed quite a few things over the past few months, learning as I go. But I am having a huge problem with one part that I am trying to print. I have failed at least 6 times. And I need some advice. The file I am trying to print is this: https://www.dropbox.com/s/zsn96gard590bvq/skirt.stl?dl=0 And everytime I try to print, I get this: https://www.dropbox.com/s/jk7f4eca2u3c308/2015-03-19%2008.48.20.jpg?dl=0 I am using mostly default settings, except the layer height is 0.06mm, and speed is 30mm/s. If I print without supports, I get that result everytime. If I add supports, it fails even quicker. I have also tried glue from the glue stick, as well as hairspray, same issue. Any suggestions?
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!