Jump to content

Schoffra

Member
  • Posts

    12
  • Joined

  • Last visited

Everything posted by Schoffra

  1. Hello everyone. I am optimizing my print s on the S5. As you can see, the quality of the slingshot is nearly perfect. but around the z-scar there seems to be a problem. i suggest it has something to do with the wipe distance (actual it is at 0.2mm) . but I really dont get the mechanics of it. i am very happy on any suggestions how to improve this.
  2. Could you please upload the stl again. I really would like to try this out.
  3. I recently bought a used S5. So far it works great. With the last print I had very bad quality on a little overhang. I think the cooling was not working properly. Is there a way to start the cooling fans manually? Due to the covers I dont see the blades spinning. On my S2 it was an easy thing to do but on the S5 I didnt find an option for that in the menu. As I dont find a topic on this in the forum I suggest I am t0o stupid to find it xD
  4. Ok thank you so much. I will try that.
  5. Hello everyone. I recently bought a used S5. So far I am very happy with the machine. But it seems to have a strange behavior. As you can see on th pictuer there is a perfect wall on one side of the z-scar and some kind of offset on the other side. The offset keeps on going till the wall ends into an opening on the other side of the model. Short belts should be tight and material is as dry as it can be. Any suggestions?
  6. Same problem here. The past few days I always get "Trying to print out of printing area". I have two different kinds of SD cards and the problem occured with both. I had a similar issue with the original UM2 firmware. There the printhead just stopped randomly while printing whitout any message on the display. Since I have TinkeGnome the result is the same but the printhead moves to start and the error message is displaied. I didn't seperate the cables yet. Only thing I did so far was checking the SD card slot. It seems to be perfectly clean. It is very frustrating as there is no sulotion to this problem yet! Any help is appriciated!
  7. Thank you all for the replies. First I was very unhappy to tinker with material flow but the results are so nice that I can completely live with it. I have the check if the dimensions of the print are still within parameters. I will print some test cubes to check on that.
  8. Hi guys. I followed this thread for quite some time now. I also have the problem of bad looking top layers (lines not touching). With the extrusion testprint I reach 10mm3/s with no problem at all. So underextrusion does not seem to be the problem. I startet to increase material flow to 110% an I get pretty nice results. Is there any way to set the material flow in cura or do i have to set this manually every time anew?
  9. Thank you very much for the quick reply. I will check the things you mentioned as soon as I am at home.
  10. Hi everyone. I have a similar issue with large prints I do at the moment. Every time the print head gets to the far left corner I get underextrusion. Walls do not touch and I get the "tweet" sound of the feederstepper when it snaps back due to high resistance. In the front area where the bowden tube isn't bent that much it is no problem at all. I print at 220°C and 55mm/s. Layer hight 0.2mm. Any suggestions how to fix this problem? When I am home I will post some pictures.
×
×
  • Create New...