StudioKubuz
-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by StudioKubuz
-
-
Kind of stupid to not show any print profile when a combination is not supported.
Wish there was an option that overrides the pampering mode -
I have the same problem.
When i u plug the usb stick its starts working again. I don't know why but that is the fix for me
-
mn, weird.
Did you ever printed abrassive materials with it?
-
Hi everybody, I have a question regarding the camera feed of the Ultimaker S5.
I bought one last week, and i am discovering some issues.
I've made some short screen recordings to explain myself better.
This link is a screen recording of the build in camera feed.
This link is a screen recording of an old phone used as an IP camera using Droid Cam.Is there something wrong with my machine ? Do I need to send it back to the vendor ?
I am a bit confused here. I am sure this is not supposed to be on a 6.5k machine.Are there any settings, of benchmarks I can check to see the connectivity
Thanks in advance.Best Dennis.
-
4 hours ago, ctbeke said:
Also some features are only available when subscribing to Ultimaker Essentials.
Well in that case you can contact me for in-depth feedback. I can make an invoice for it.
-
This would be great feature. I love the idea behind digital factor, but i do think it way to limited.
-
On 11/29/2019 at 5:01 PM, Smithy said:
Prusa and S5 is not comparable, the S5 head is much more heavier than the prusa head, so you have to print slower to avoid ringing and other things.
Thats kind of strange, cause the Prusa has a direct drive...
-
I had the same problem with my Ultimaker 2, after upgrading last week.
Revert it back to the original settings. and all was fine.Its very strange its changes direction in mid-print.
Could it be that your retraction settings are at 10 x of the default.
Absolutely not sure. But it may be worth it to check.
-
-
Prijzen:
Samen: 2700 euro
Apart
Ultimaker2 1600 euro + Filament dia 2.85 mm
Makerbot Rep2 1200 euro + Filament dia 1.75 mm
Ik verkoop mijn 2 - 3d printers omdat ik een nieuw model wil aanschaffen.
- Replicator 2 - goede staat (in gebruik sinds oktober 2013)
- Ultimaker 2 - Zeer goede staat (in gebruik sinds mei 2015)
Beide printers zijn goed onderhouden en mankeren niets.
Bijhorend zijn er nog >20 spoelen PLA In verschillende kleuren.
Specificaties
Makerbot Replicator 2
Specificaties
Ultimaker2
https://shop.ultimaker.com/product/8/ultimaker-2
Materiaal: (>600 euro waarde)
-PLA-PHA (http://colorfabb.com/'>http://colorfabb.com/'>http://colorfabb.com/)
2x Standard White - Olimpic Gold - Signal Yellow - Warm Red - Fluoriscent Pink - Greenish Beige - Olive Green - Leaf green - Chocolate Brouwn - Sky Blue - Blu Grey - Standard black
-XT (http://colorfabb.com/)
XT Clear - XT White
Specials - (http://colorfabb.com/)
Wood - Bamboo - Glow
en vele andere zoals PET - BENDLAY - Flexible,...
Ultimaker S5 Startup Problem
in UltiMaker 3D printers
Posted
No, there was not.
i just unplugged the usb and did a reboot. That resolved the problem.