afranx

hi, I just installed Cura 3.6.0 and I have this problem. How can I fix it? this is the cura-crash log :)

thanks for the tips. I have not yet fixed this work but with your suggestions I created other objects very resistant

I have printing problems whit PLA. The layer above the infill is not created correctly. What should I change? layer h:0.1 shell: 0.4 bottom\top 0.4 fill 3 speed: 40 temp: 210

ok I solved reinstalling Cura. Now works fine! tnx

ops! double post! sorry

tnx Peggy

Can I set the brim thinner? I only found the setup to define number lines

I fixed it with unistall / re-install with AppCleaner and now the software works perfectly. thanks for the support

can you give me the link where you can post this problem?

I checked and the mac is not working. I can not retrieve information from gcode. The problem I think is in end.gcode ; -- END GCODE --M104 S0 ;extruder heater offM140 S0 ;heated bed heater off (if you have it)G90;G91 ;relative positioningG1 E-5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressureG1 Z200 F{travel_speed} ;move Z up a bit and retract filament even moreG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the wayM84 ;steppers offG90 ;absolute positioning; -- end of END GCODE -- missing the last line that records the profile. How can I fix it? mac 10.6.8 / cura 15.02.01

what you mean by "device" the printer? the slicer? the Mac?

tomorrow I will experiment with the mac and I will keep you informed. thanks for the support

no is a new gcode. here it is https://www.dropbox.com/s/jiok9mlxnmd5gp5/cuboFLEX4-v50LH02.gcode?dl=0 is a simple print test in macosx 10.6.8 at office I redid the test now at home with win7 creating the gcode and it works perfectly I have to make sure that I use in the office cure 15.02.1 in Mac

@SandervG tnx for the link but I still have not solved the problem

sorry in cura I found only "load profile" I tried to use it and I got this message "No profile found in Gcode file, This feature only works with GCode files made by Cura 12.07 or newer" but I've Cura 15.02.1

Hi, i'm a very newbie if I have forgotten the settings of the press, can I find them all in gcode? I read the gcode file with a text editor and I have only found this: ;Basic settings: Layer height: 0.2 Walls: 1.2 Fill: 25 ;M109 S245 ;Uncomment to add your own temperature line for the print speed I used http://gcode.ws/ I have not yet found these other values bottom/top thickness enable\disable retraction support type platform adhesion type there is a faster method to extract the settings from a gcode? or how can I save the settings for a print with cura??