Jump to content

archigraphe

Dormant
  • Posts

    1
  • Joined

  • Last visited

Everything posted by archigraphe

  1. Hello, I'm a French user of Cura 15 (and previous..) on a Leapfrog Creatr Dual. Cura is the only Software I can use On the Leapfrog for Production ( I greatly thank's the Ultimaker Team, who stay in the RepRap Spirit..). I show you the specs. System Win 7 - 64bits. Last Arduino Drivers the USB on my machine is on Com 8 / 115.000 bauds. Gcode : Reprap (Marlin/Sprinter). I use the Printer with ABS from Color fabb, the results are ok for me ( for my use..) For Colorfabb ABS and mechanical Part: Layer : .25 Shell : .70 Width top / bottom : .75 Fill : 80% Temps : 232°C Bed Temp : 80°c Brim : 10 turn... Dia filament : 1.75 With 95% Advance Conf : Dia Nozzle : .35 Retract speed : 40 Lenght : 4.5 Quality : 1st layer width : .2 Width line for 1st layer : 100 Speed : Pos. Speed : 60 1st layer : 20 Fill. speed : 60 Top / Bottom Speed : 30 Ext. Shell : 40 Int. Shell : 60 You can see some printing with the printer on : www.b3ddesign.com the large FDM part are printing with the Leapfrog, as the engine manifold and some other parts... No Warping is very difficult to obtain, you need to "close" the printer to maintain the temp. To fix on the bed I'm using Blue Tape, very good. don't hesitate contact me on our web site for more information.
×
×
  • Create New...