kpk
Dormant-
Posts
21 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by kpk
-
We tried printing Nylon in ultimaker , we are gald to inform that we successfully printing Nylon on Ultimaker, but one issue we are facing is that 3D object printed from Nylon warps such a way that it looses its asthetics. We have tried using Kapton tape but kapton tape itself comes out with the object while it is warping. Can anyone suggest that how we can avoid warping of Nylon in Ultimaker. Any tips and techniques would be greatly appreciated. Thank you
-
Has any one tried with nylon filament using in your ultimaker 2 , can any one tell the parameters settings in software.
-
Yes both @labern Can you specify providing layer heights, temps and speed meaning?
-
-
Ultimaker 2 Error - Stopped: X or Y switch stuck
kpk replied to kpk's topic in UltiMaker 3D printers
@SandervG The temperature sensor error is solved right now. When i started the machine , and clicked on home position it went to home position and started vibrating and parallely i got error on the screen that X or Y axes stuck. I am not getting how to resolve this , as you already said is there any disturbance due to transportation, but according to me there is no such misalignment but it vibrates and makes loud sound like something is grinding inside. -
Ultimaker 2 Error - Stopped: X or Y switch stuck
kpk replied to kpk's topic in UltiMaker 3D printers
@marrit you mean connect the printer to software cura and from cura need to install new firmware??? -
Hi SandervG, X and Y axes error has come up now how to deal with this issue
-
Can any one suggest solution for this??? we are facing this issue
-
Following is the image shown , so can any one suggest what would be the possible solution for this problem. Kindly provide an detailed explanation.
-
i have kept the common parameters like for ABS..
-
There is an attached image for the problem that i am facing during printing , while printing there are dots on the layer printed , kindly provide solution for this...I have already calibrated build plate but the problem is not being solved.
-
There is temperature sensor error that happens, But not able resolve
kpk replied to kpk's topic in UltiMaker 3D printers
There it shows on the screen as error message -
I have leveled the build plate, i have applied glue to the plate. But then also there is no proper printing , the object is moving away from the build surface kindly provide me a solution for this, i have read all previous blogs and posts did not help out. kindly tell me is there any software setting that need to be done, please provide details in image format, it would be great. thank you