UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
From the first moment my printer has problems reaching its zero point.
When returning to X,Y = 0,0 the X- and Y- limit switches are touched, but afterwards the print-head wants to do a step forward. This results the head blocks and the stepper motors want to continue.
The (temporary) solution to this is to put the print-head by hand into the corner, from which the printer continues its program. Somehow i can not find the problem or a similar problem on the forum.
On my dropbox is a movie that shows what happens :
Ultimaker original+ Home problem with steppers/limits
in UltiMaker 3D printers
Posted
Hey All,
Problem
From the first moment my printer has problems reaching its zero point.
When returning to X,Y = 0,0 the X- and Y- limit switches are touched, but afterwards the print-head wants to do a step forward. This results the head blocks and the stepper motors want to continue.
The (temporary) solution to this is to put the print-head by hand into the corner, from which the printer continues its program. Somehow i can not find the problem or a similar problem on the forum.
On my dropbox is a movie that shows what happens :
https://www.dropbox.com/s/x6taaxgg91dzyzv/IMG_1634_edit.mp4?dl=0
Solved
X-limit switch was connected on the y-port of the electronic board and Y-limit switch was connected on the x-port of the electronic board.