SimoLeo

Thanks Dodgrr I'll try whit the layer time .. will see ;

Dear Joel I have to think about it... (just because I'd like to sell it in a shop) Anyway it's very easy to model it with blender

Thanks for the advice. I tried with the MeshMixer support without good results...(even when I chosen the Diginz Of setting) have you some sample/setting or further suggestion to show me? Please don't mention the extrudableme page because I really don't know how that guy can get that quality with an UM2.. :( to who don't know the web page mentioned above here is the link : http://www.extrudable.me/2013/12/17/highqualityultimaker2/

Hi there, could anyone help me to print this object in a better way? C'è qualcuno che mi può aiutare a stampare quest'oggetto in modo migliore? The setting which I used are : Layer height : 0.1 __Noozle ;0.4__Retraction minimum .5 mm - 50mm - 30mm/s Inner shell speed : 20mm/s ___Outer shell speed : 40 mm/s __ Travel speed : 100 mm/s Infill : 20% _Brim : 20_ min layer time 10sec _ Fan 100% (after the first 3 layer) Temp: 195° - Flow 100% the pics shows the object from the top and the bottom le foto mostrano i due lati dell'oggetto, dall'alto e dal basso