mrSEADEMON
-
Posts
24 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by mrSEADEMON
-
-
up to version 4.2.1 when printing starts at 200 degrees. This parameter cannot be changed :( TypeAMachines printer I change all settings of the nozzle to 230 and nothing happens. anyway 200
-
-
-
in cura 4.2 hase option for hotend "default printing tempriche" to change temp of hot end start
in 4.3 this paramiter was delete (it hase on option but don't have on panels".
now all time first layer 200 C 😞
go back to 4.21
-
in 4.0 cura my printer profile don`t have Nozzle diameter setting 😞 What need add to priofile to see it?
-
8 hours ago, smartavionics said:
I looked at your gcode and can not see any movement of the nozzle to near the bed. Where does the crash occur? At the start of the print or later? Are you sure your printer has homed correctly?
On start. I think very fast speed of movment Z axe. I try fix it on config
-
Has some problem with printing. Start use this version and destroy 2 printers. Some time hi try drop Z axe very fast. And destroy axes.
-
11 hours ago, Nuttavoot said:
Newbie here, how to add start cura with Nvidia card ?
Go to nvidia setting. Add cura to start with nvidia drivers
-
cura 3.2.1 crash after restart computer. And lost all settings
-
I instal Cura 3.2.1 and now i can't change nozzle_size
-
One question. We can put down model under the table for cuting part of model. And we cat put up model (fly up the table) but cura can't make support for this model. Some time need make print on support for best qualiti.
-
Just now, ahoeben said:
@mrSEADEMON, you can probably force Cura to use the nvidia card instead of the embedded gpu, and then the full layer view should be available.
thanks. I add start cura with Nvidia card and all work
-
Just now, ahoeben said:
@mrSEADEMON and @erman58: In the General preference page, is the option "Force layer view compatibility mode (restart required)" checked? If so, uncheck it and restart Cura.
If that does not solve it, that means that your graphics driver tells Cura it does not support the features needed to show the "non-compatiblity-mode" version of layerview, and Cura can only display simplified layerview.
thanks. I add start cura with Nvidia card and all work
-
-
-
-
i change sheme to but no color line too!! win7 64
-
-
When you make a old function "Split object into parts"?
I use this function and i need 2 version Cura to instal 15.04 and 3.2
but if this function work on Cura 3.2 i don't need instal v15. Thanks
-
Can you add a calculation of the cost of time per kilowatt per hour? Calculation only on materials is not correct
-
I make config for Type A machines Serises 1 2014+ can you add it to you program?
https://www.dropbox.com/s/hp0xatkwoj0uhiw/Type%20A%20machnines%20Cura%202.5%20resources.rar?dl=0
and one question where is "Split object into part" function?
-
15.09.91 No russian lang, don't work diamer, print tempriche, bead temptiche
-
Help me find a description for the board RUMBA. What you need to cut off the legs at the driver and any jumper switch? Thanks a lot for the help
can you add a photo from board jumpers and lags TMC2100
CURA 4.2.1 and up 4.8
in UltiMaker Cura
Posted
in 4.2.1 has option default printing temp
in new don't have.
I put temptiche 230 in new 4.3+ and when printer start printing tempriche 200 and hase fail. after some layer tempriche change to 230