Jump to content
Ultimaker Community of 3D Printing Experts

danidore

Dormant
  • Content Count

    2
  • Joined

  • Last visited

Everything posted by danidore

  1. Hey, I have a problem with my prints: I printed that object and it took me several hours to remove extra PLA around every element; now i know that the nozzle had to move every time from a place to another and that was the result but can I actually do something else from the beginning to solve this problem? I use retraction speed 10mm/s and length 0.5mm, witch is a little lower than default but when i raise them it make holes in the object. Other settings: 0.09mm resolution, 230 degrees temperature, 100% speed (it is one of the first good prints with 100 percent speed), material PLA. Does
  2. Hei there, I have some problems but i can't figure out what is wrong with this printer; the thing is it basically works fine but almost always skips steps (the little extrusion engine in the back makes that annoying squeak sound and goes back a little). I manage to do some excelent prints but with a lot of effort, 5-10 tryouts, and the thing I wish to fix the most is speed; I can only print decent stuff at speeds of 50% or bellow (and it takes a lifetime). Most problems appears when the resolution is over 150 microns... Bellow that 100 or 60 works a little bit better. I noticed that ABS is
×
×
  • Create New...