Jump to content
Ultimaker Community of 3D Printing Experts

microdure

Dormant
  • Content Count

    11
  • Joined

  • Last visited

Everything posted by microdure

  1. here is a quad frame CPE
  2. Bonjour, Je viens de commandé aquasolve de chez formfutura pour ulti original dual extrusion . Aquasolve à la particularité de se dissoudre dans l'eau . je l'ai spécialement commander pour imprimer les supports d'impression pour avoir plus facile après pour le nettoyage . j'ai été étonner à la livraison de constaté que la bobine ne contient que 300 gr de filament pour un prix de 29.95 € soit 99.80/KILO Quelqu'un aurait-il déjà travaillé avec et aurait quelques conseils à me donner Merci d'avance
  3. Hi Sandervg , Thank you for your feedback My order number is 15253206 thank you in advance
  4. Version 1.0

    5,404 downloads

    Copperfill & bronzefill colorfabb
  5. Version 1.0

    1,918 downloads

    Frame kit abs hubsan x4 coreless 8mm
  6. Version 1.0

    2,394 downloads

    Several changes in frame kit 90mm with 8mm engines corerless for a flying controller jjrc-1000 + 1s 300ma lipo 95c
  7. Version 1.0

    1,773 downloads

    frame kit for blade nano quintals on Sketchup model that allows boarding motor 8 mm
  8. Version 1.0

    1,825 downloads

    After breaking my arm nano quintals 3D blade I recycle the fly controller on a frame that I modeled in SketchUp with 8mm engines https://www.facebook.com/mic.surbook/videos/10152957883304550/
  9. Hello, I have the same problem with my order I ordered a dual extrusion kit € 285 ttc on September 10 and I still do not have a shipping confirmation after 13 days ^^ Knowing that the product ordered is delivered in the (delivery. 2-5 working days) their support link sue payment confirmation redirectionne on the support page or it ua two links of contact block. it's raiment is froutre people of the mouth !!!!
  10. Hello I disassembled for cleaning the nozzle. I fixed on a clip I made flu heated with a small blowtorch and then I manually abs pushes a wire in the conduit of the nozzle until out the other dimension then I leave to cool. well once I warmed very briefly cooled the nozzle max 100 ° (water bath). Once warmed briefly with another clip I shoot with a snap abs nozzle thread. this has the effect to pull in all the particles cling abs, particle that was deposit on internal walls of the nozzle.
  11. Ok many thanks but questions remain... - TG ? - Strength to chemicals ? - optimal print setting ? hello, I can not to have good results with températurre between 240/250 ° the best settings on my OU are Layer thickness: 0.04 mm Print speed: 40mm / s t ° nozzle: 223 ° t ° carpets: 60 flow rates: 110%
×
×
  • Create New...