Jump to content

NoviceExpert

Dormant
  • Posts

    4
  • Joined

  • Last visited

Everything posted by NoviceExpert

  1. @tinkergnome Thanks a bunch that worked perfectly, now my startup G-Code is back to working properly.
  2. I have been using the old 15.04.6 version of Cura for a long time. I have been advised to upgrade to the beta to check out the new features and so far am impressed with the 4.0.0 beta. However, I like my bed and extruder to heat up at the same time and these added lines of G-Code prevent that when I slice. M140 S{print_bed_temperature} M105 M190 S{print_bed_temperature} M104 S{print_temperature} M105 M109 S{print_temperature} M82 ;absolute extrusion mode Where do these lines get added, because I used to be able to heat both at the same time with 15.04.6 with the following code. M107; FANS OFF M140 S{print_bed_temperature} M104 S{print_temperature} G91; RELATIVE POSITIONING G28; HOME ALL AXIS M84; KILL MOTORS M109 S{print_temperature} G90; ABOSOLUTE POSITIONING G1 X5 Y5 F10000; MOVE CLOSE TO HOME G28; HOME ALL AXIS G29; PROBE BED M190 S{print_bed_temperature} G1 Z100; RAISE Z-AXIS TO 100MM G1 X0 F1000; MOVE SLOW TO HOME G92 E0; ZERO EXTRUDER G1 E10; PRIME NOZZLE M25; WAIT FOR USER G92 E0; ZERO EXTRUDER G1 F{travel_speed}; START M140 S60 G92 E0 I don't want to have to remove the lines everytime I slice a print, can these lines be edited or taken out of start G-Code somewhere?
  3. Sorry, don't mean to intrude. I am from the Robo 3D forum and I absolutely love what you have done with Cura 15.06.02! I have changed a few things so that I can use this with different nozzles, a different build platform, and my custom G-Code. If anyone has a 3D printer that's not an Ultimaker, but loves Cura to pieces, you can check out this link. http://bit.ly/1g8tYPc To change this: To this:
×
×
  • Create New...