[3D CAD files for the Ultimaker 2 Extendes]

To make an extended  out of an um2 you also need a new z-screw / stepper & axis. Also extend some wires. But it should not be hard to do. I believe um policy  is to publish the drawings 6 months after release  of a machine... so that should be soon.. did you ask them?

Otherwise it should be easy to adapt the um2 stepfiles... if you do it yourself my tip would be to lower the position of the spool holder  (keep it same hight to ground as on UM2.  Not the hight as on extended).

 

Thank you ultiarjan, I didn't know about the 6 month idle period and I have reached out to Ultimaker to obtain some of the cad files early. I will keep this thread updated with any new information.

Good Idea on lowering the filament spool and I will probably add a filament guide for those long prints.

[3D CAD files for the Ultimaker 2 Extendes]

Hello folks! I am a long time designer, but new to Ultimaker and I am excited to add to this community.

First working on modifications to reduce draft, does anyone have a CAD model of the Ultimaker 2 Extended? At a minimum, all that is necessary are the six panels of the UM2 Extended and the UM2 model can be updated