Jump to content

Andrey1

Dormant
  • Posts

    13
  • Joined

  • Last visited

Everything posted by Andrey1

  1. Version 1.0.0

    236 downloads

    This is iPad Air stand. You can change the incline of the tablet by pushing the button up and pulling your iPad up or down.Printed with PLA. There are 5 main parts of the stand: Main body consists of two parts, which have juts and holes to ease assembling. Cilinder with groove to insert iPad. Button with lever (consists of two parts to ease printing) Tooth Spring (i took it from ordinary ballpoint pen) Parts of main body and of the button are glue together with dichloroethane (as i used PLA). Before gluing you should insert button with lever, tooth, spring and cylinder into one part of the main body. Then smear it with dichloroethane and connect with the second part of the main body.
  2. Version 1.0

    554 downloads

    This is my second design of the fidget spinner. Double coloured. Central bearing is 22X8X7, side bearings are 19X7X6.
  3. Version 1.0

    612 downloads

    All parts are printed as usual without support, but central cup. It is printed thumb-touching surface up. I used standard 608 bearing.
  4. Andrey1

    Minion

    Version 1.0

    668 downloads

    This model was designed as a toy for children with inner compartment. May be used as a case for some electronic toy (with further customisation).
  5. Version 1.0

    708 downloads

    Alien plate
  6. Version 1.0

    1,101 downloads

    This is the low friction stand for big filament spool (2 kg of plastic). Inner spool diameter - 50 mm, outer diameter - 300 mm.
  7. Andrey1

    Egg

    Version 1.0

    648 downloads

    This design on Youmagine: click
  8. Andrey1

    Easter Egg

    Version 1.0

    905 downloads

    My design on Youmagine
  9. Hi, guys! I'd like to share my experience in double extrusion on Ultimaker 2. Maybe it will be useful. Ok. Several month ago i bought Ulticreatr 2X. I knew it was not good (according to some replies here), but desire to upgrade my printer and to make double coloured print prevailed. After it was delivered, I decided to postpone installation. Designers of the Ulticreatr 2X said that its feature didn't allow to use heated bed. So, i decided to study this problem first. I don't want to describe all my way to double extrusion. It was thorny. Besides heated bed issue, neither firmware nor Cura modifications, presented by Ulticreatr 2X designers worked. So, I searched decisions in the community. And I have found it. The first it was firmware. Tinkergnome, thank you very much for your work. It is extremely useful and works excellent!!! The second was slicer. I tried to modify Cura 2.3.1 as it was described by Ulticreatr team, but it was all for nothing. Then I tried to modify it according to this topics, but still without success! And then, thanks to Crema I tried Cura 15.04! Today I printed my first double colloured model! So, Ultimaker 2 + Ultikreatr 2X + Tinkergnome firmware + Cura 15.04 = Dual extrusion Thanks everyone!
  10. Hi, guys! I'd like to share my experience in double extrusion on Ultimaker 2. I guess it will be useful. Several month ago i bought Ulticreatr 2X (see the post above). I knew it was not good (according to some replies here), but desire to upgrade my printer and to make double coloured print prevailed. After it was delivered, I decided to postpone installation. Designers of the Ulticreatr 2X said that its feature didn't allow to use heated bed. So, i decided to study this problem first. I don't want to describe all my way to double extrusion. It was thorny. Besides heated bed issue, neither firmware nor Cura modifications, presented by Ulticreatr 2X designers worked. So, I searched decisions in the community. And I have found it. The first it was firmware. Tinkergnome, thank you very much for your work. It is extremely useful and works excellent!!! The second was slicer. I tried to modify Cura 2.3.1 as it was described by Ulticreatr team, but it was all for nothing. Then I tried to modify it according to this topics, but still without success! I tried even Simplify3D. Really powerful tool, but I need more time to study it. And then, thanks to Crema I tried Cura 15.04! Today I printed my first double colloured model! So, Ultimaker 2 + Ultikreatr 2X + Tinkergnome firmware + Cura 15.04 = Dual extrusion Thanks everyone!
  11. Hi, guys! Sorry for my english, but i don't speak german at all:) I'd like to share my experience in double extrusion on Ultimaker 2. Maybe it will be useful. Sorry if all i will tell you about was already discussed in previous topics! I tried to translate all the thread it google translate, but it was useless. Translated text seldom had meaning for me (ok, google:P!). Ok. Several month ago i bought Ulticreatr 2X. I knew it was not good (according to some replies here), but desire to upgrade my printer and to make double coloured print prevailed. After it was delivered, I decided to postpone installation. Designers of the Ulticreatr 2X said that its feature didn't allow to use heated bed. So, i decided to study this problem first. I don't want to describe all my way to double extrusion. It was thorny. Besides heated bed issue, neither firmware nor Cura modifications, presented by Ulticreatr 2X designers worked. So, I searched decisions in the community. And I have found it. The first it was firmware. Tinkergnome, thank you very much for your work. It is extremely useful and works excellent!!! The second was slicer. I tried to modify Cura 2.3.1 as it was described by Ulticreatr team, but it was all for nothing. Then I tried to modify it according to this topics, but still without success! I tried even Simplify3D. Really powerful tool, but I need more time to study it. And then, thanks to Crema and all this thread I tried Cura 15.04! Today I printed my first double colloured model! So, Ultimaker 2 + Ultikreatr 2X + Tinkergnome firmware + Cura 15.04 = Dual extrusion Thanks everyone!
  12. Hello, guys! I have bought Ultikreatr dual extrusion kit about four month ago. Yesterday I finally ventured to install it on my Ultimaker 2. It was hard, but solvable quest. Now it looks like 3d printer with double extrusion. Today I tried to improve Cura as it described here http://ulti.creatr.it/en/support/2x/slicing.html. I have done all steps, but it was all for nothing. Cura doesn't work. Did anyone have positive experience in changing Cura 2.3.1 for Ultikreatr dual extrusion kit?
  13. Hello, Shane! Please, tell me did you have positive experience with creatr dual extrusion upgrade kit? Do you have both extruders work? Did you solve the problem with the heated bed? I bought this kit myself, but i steel didn't decide to install it.
×
×
  • Create New...