Jump to content

Mcgyver

New member
  • Posts

    1
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Ultimaker 2 (Ext
    +)
  • Country
    SE

Mcgyver's Achievements

0

Reputation

  1. Hey As mentioned: Our UM2 retracts filament about 200mm after printing is done. About 2 month ago i updated the software on the machine, still worked after that. I hade issues with Cura 4.6 that the nozzle stopped in the print when finished so i read here a little and upgraded to 4.8 and that issue went away, but now i have another issue. The printer is running firmware 3.3.0 Any help would be appreciated. Here's the start and end of the G-code if that helps. ;FLAVOR:UltiGCode ;TIME:1424 ;MATERIAL:1309 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.4 ;MINX:89.779 ;MINY:99.991 ;MINZ:0.3 ;MAXX:133.222 ;MAXY:122.474 ;MAXZ:5.58 ;Generated with Cura_SteamEngine 4.8.0 M82 ;absolute extrusion mode G0 F3000 Y50 ;avoid prime blob G92 E0 G92 E0 G10 ;LAYER_COUNT:45 ;LAYER:0 M107 G0 F3600 X93.488 Y102.953 Z0.3 ;TYPE:SKIRT ------------------------------------------------------------- ;TIME_ELAPSED:1424.057764 G10 M107 M25 ;Stop reading from this point on. M82 ;absolute extrusion mode ;End of Gcode
×
×
  • Create New...