Tonypartington
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Tonypartington
-
-
Many thank guys I will open/clean the reader and see if it works.
-
I have an Ultimaker 2+ extended - working perfectly for about 2 years. This afternoon it suddenly stopped reading SD cards, it just says “reading card......” and goes into a dream. I have about 5 cards all were working OK and all read OK on MacBook, (a few weeks ago I noticed that it was getting a bit fussy about how the card was inserted, I needed to give a little upward pressure as well as pushing to get the “click”). None of the cards work anymore - has the reader given up? Is it fixable ?
Error: Tried printing out of printing area - SOLVED
in UltiMaker 3D printers
Posted
Disassembled the display unit and cleaned the SD reader with alcohol soaked toothpick blew on it an vacuumed it and it now works! Still not 100% but having learned the procedure I now feel more confident - it would be nice to have an alternative to the SD card on the
Ultimaker 2 As the SD card reader seems to have a finite life. Many thanks for your help again.