Jump to content

ErenKaratepe

Member
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by ErenKaratepe

  1. Hi All, Good Morning, Maybe need STL file(1041-Feeder Small Gear). I share link. https://drive.google.com/open?id=0B89YxIIGvHVaM09RSzdRc2ViWXM
  2. Hi, I found a useful video on the youtube. Simultaneously with this video, it may be helpful to repeat the steps. If ıt does not solve this problem. I have a simple solution. Choose platform adhesion type raft. This is a quick solution.
  3. Hi, First you see this video and calibrate the platform. And look heated bed setting, PLA Heatedbed=60 Degree ABS Heatedbed= 80-100 Degree The machine is on the balcony, under the air conditioner, and in front of from the door and window, take him away. And I think you should use glue. (This glue UHU Glue Stick. Dont try faber castell, and pritt(it does not work). And try this G-Code https://drive.google.com/open?id=0B89YxIIGvHVabEFlNkxHY21rbGM
  4. Hi, I have a suggestion that will probably solve your problem. I try 10 mainboard(More than 8000 hours used mainbord). And solved 9 mainboard. You try stick passive cooler.
  5. Hi, Which part? Have a picture? you can download a link to the STL file. https://drive.google.com/open?id=0B89YxIIGvHVaMnA2RmVFaVAxNjA
  6. Version 1.0

    0 downloads

    New print
  7. Because My customer bought a new PT100b and heater cartridge. I did the installation. and dont touching fan bracket. Today I make another checks and tests.
  8. Hi, I download cura 14.09 and not supported ultimaker 2 extended. I use olsson block 0.8mm nozzle.But my costumer printer heater error. I need 14.09 extended firmware or another solution. Is there facing similar issues? Do I need to buy a more powerful heater?
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!