Jump to content

ErenKaratepe

Dormant
  • Posts

    8
  • Joined

  • Last visited

Everything posted by ErenKaratepe

  1. Hi All, Good Morning, Maybe need STL file(1041-Feeder Small Gear). I share link. https://drive.google.com/open?id=0B89YxIIGvHVaM09RSzdRc2ViWXM
  2. Hi, I found a useful video on the youtube. Simultaneously with this video, it may be helpful to repeat the steps. If ıt does not solve this problem. I have a simple solution. Choose platform adhesion type raft. This is a quick solution.
  3. Hi, First you see this video and calibrate the platform. And look heated bed setting, PLA Heatedbed=60 Degree ABS Heatedbed= 80-100 Degree The machine is on the balcony, under the air conditioner, and in front of from the door and window, take him away. And I think you should use glue. (This glue UHU Glue Stick. Dont try faber castell, and pritt(it does not work). And try this G-Code https://drive.google.com/open?id=0B89YxIIGvHVabEFlNkxHY21rbGM
  4. Hi, I have a suggestion that will probably solve your problem. I try 10 mainboard(More than 8000 hours used mainbord). And solved 9 mainboard. You try stick passive cooler.
  5. Hi, Which part? Have a picture? you can download a link to the STL file. https://drive.google.com/open?id=0B89YxIIGvHVaMnA2RmVFaVAxNjA
  6. Version 1.0

    0 downloads

    New print
  7. Because My customer bought a new PT100b and heater cartridge. I did the installation. and dont touching fan bracket. Today I make another checks and tests.
  8. Hi, I download cura 14.09 and not supported ultimaker 2 extended. I use olsson block 0.8mm nozzle.But my costumer printer heater error. I need 14.09 extended firmware or another solution. Is there facing similar issues? Do I need to buy a more powerful heater?
×
×
  • Create New...