taleo11
-
Posts
13 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by taleo11
-
-
Hey guys,
So im trying to do the dual fan set up but the fans i got dont seem to work. Heres the link:
They're 24v DC fans and i double checked the voltage and it is reading 24v but they just dont work. ive tried two different ones and they still didnt work. I have an umo+ and the stock 50mm fan works just fine so im still rocking that guy for now so my question is is there anything i can do to make the fans i bought work? or am i gonna need to buy special fans..
I make my own fan shrouds so I pretty much just glanced at the posts above and didnt see anything obvious about what fans to buy so If that information is above let me know.
Thanks!
-
Looks awesome becky! Are you worried at all about over heating your steppers at all? Im going to be building an enclosure for my UMO+ here in a couple days and my only concern right now it letting the enclosure get too hot since the bed will be at a constant 100c for hours and I dont want anything to over heat.
With the UMO+, you can flip the X and Y motors to the outside of the case. Search Youmagine for ultimaker motor corner. You won't have to worry about them overheating, and print quality even improves. You can avoid needing new rods if you use bearing adapters.
-
Looks awesome becky! Are you worried at all about over heating your steppers at all? Im going to be building an enclosure for my UMO+ here in a couple days and my only concern right now it letting the enclosure get too hot since the bed will be at a constant 100c for hours and I dont want anything to over heat.
-
Okaaaaay,
this is weird, but I think I solved it: I re-flashed the firmware from Cura 15.04.4, did a factory reset, and so far I did three prints without any problems. Maybe this helps others as well - just try it.
Cheers, have a nice weekend -
Phil
Hey Phil,
I've been having the same problem as you with my umo+ where cleaning the z rods also didnt work for me. How did you re-flash the firmware and do a factory reset? I'm still kind of a noob when it comes to firmware issues.
Thanks!
-
Okay I'll try those settings out and see what happens. Thanks!
-
Yeah they're both ticked.
-
Okay I ran a print with 50% infill and 1.2mm bottom top thickness, .2mm layer height and the same thing is happening. There some parts seem to be over extruding as you can kinda tell from this picture. I thought about upgrading the hot end on my UMO+ but I couldn't find a real good thread talking about it. Would you suggest the e3d v6 hot end? I'm just not really interested in printing a whole new carriage and installing it since my printer is only a month old.
-
The infill ive been using is 20 percent which i would think would be alright and increasing the top layer thickness didnt help much you can still tell the parts wont be waterproof. Should i play with the extrusion percentage? The bottom layers have been pretty good and each pass has been overlapping well.
-
Maybe it is slightly underextruding. Have you checked that the filament diameter matches the diameter dialed into the UM? A micrometer gauge is great to check this.
Yeah i checked that and its between 2.85 and 2.90 so i should be alright there
-
Alright I'll try that out. Thanks for the help
-
Hi,
I'm a new owner of a UMO+ and so far my prints have been turning out pretty great! The only problem is that I'm getting some waffling on the tops of the parts. Any suggestions on how to fix this problem?
Settings:
hot end: 210
Bed: 60
Speed:50
Top thickness: 0.8mm
Layer height: 0.2mm
I'm using the filament that came with the printer and using the stock nozzle 0.4mm.
Thanks for the help!
Change Start/End gCode in 2.1.1
in UltiMaker Cura
Posted
Hi,
So I followed your directions to get to my machine's .json file (UMO+) and this was the code in that file..
{
"id": "ultimaker_original_plus",
"version": 1,
"name": "Ultimaker Original+",
"manufacturer": "Ultimaker",
"author": "Ultimaker",
"icon": "icon_ultimaker.png",
"platform": "ultimaker2_platform.obj",
"platform_texture": "UltimakerPlusbackplate.png",
"file_formats": "text/x-gcode",
"inherits": "ultimaker_original.json",
"pages": [
"UpgradeFirmware",
"UltimakerCheckup",
"BedLeveling"
],
"machine_settings": {
"machine_heated_bed": { "default": true }
}
}
This doesnt look right at all but I'm not very good with coding so if you can assit me a little that would be great!
All I'm trying to do is make the printer prime a little more before it starts printing so if you know a better way than to edit the start gcode let me know!
Thanks!