Key23D
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Key23D
-
-
Thanks very much for your answer!
It is in the section "experimental" so I understand that it is what it is. So no "bug".
Do you by any chance know of a program that could have the same effect of "make printable" on an stl-file? (not this one) I work with a lot of scanned models that could be printed much easier that way. And then also usable with SLA/DLP type printers.
-
I now tested it in version 5.1 but the result is the same!
Does anyone know if this is looked at by Ultimaker?
-
This is the smaller version ;-).
-
This is the STL-file.
-
This is the model:
This is the sliced model. There are some layers added underneath the overhang but not extending back to the model so it is now printing in mid air.
-
In Cura 5.0 "Make Overhang Printable" does add some structure underneath the overhang but not so that it is printable.
I use this feature a lot so please fix this. Thank you!
-
Thank you for your time and effort!
Cheers,
Roman van der Rijt
Key23D
-
I saw this post yesterday already https://ultimaker.com/en/community/7493-5-extruders. It's from july 2014 where Daid said he was working on rewriting the GUI code. Do you happen to know anything about this?
Cheers,
Roman van der Rijt
Key23D
-
Hello,
I have a 5 nozzel printer here, RoVa3D from ORD Solutions to be exact, and I have some problems getting all of the nozzels to work in one print. Before I started using Cura I used Slic3r + Pronterface, in Slic3r I was able to make 5 colour prints but in Cura it seems to crash right as I load in the fifth part of the print. The maximum amount of nozzels I got to work and print perfectly are 4. The reason I started to use Cura is because of it's quality, I never got a nice looking print from Slic3r.
I was wondering if anyone knows a way to work around this issue, I am probably not going to use the fifth nozzel too much but it would be great if I got it to work.
Kind regards,
Roman van der Rijt
Key23D
-
Hello Daid and CreativeWolf,
I also have the same printer as CreativeWolf, the RoVa3D with 5 nozzels. I have been trying to optimize the printer and a couple days ago I resigned to Cura instead of Slic3r + pronterface. In the newest version of Cura, 15.04.4, I can select that my printer has 5 nozzels, but as soon as I try to do that Cura feezes. The max amount of nozzels I can get to work are 4 and that works without a problem.
Do you know if there is a way to get all the 5 nozzels to work?
Kind regards,
Roman van der Rijt
Key23D
Make overhang printable does not function anymore in Cura 5.0
in UltiMaker Cura
Posted
Thank you! I will look at those. When I design my own models I don't have the problem, it is mainly to be able to print scanned objects with some overhang here and there that can be "filled" without optically doing damage.