Jump to content

Siebet

Member
  • Content Count

    59
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Siebet

  1. Is it not an idea to make clubs for resellers and distributors? It would be great if we also could communicate through this forum....
  2. Siebet

    Empty spools!

    Hi Ultimaker Community! I have a short, easy question that everyone needs to know an answer to. Thanks for your time!
  3. Hi Joris! Is it easy to change the filament on the printer? And is the cabinet air-tight? Thanks.
  4. Hi @SandervG Yes, my friends made a flexible mold
  5. The UMO uses an Arduino based Mainboard. For firmware questions, I will refer you to @lowiekvds He made the firmware changes, and is an Arduino expert! Welcome @lowiekvds to the Ultimaker community
  6. There's no special reason (at least not that i'm aware of). AFAIK this are the standard formulas that Cura uses, if acceleration or jerk control is enabled. You can disable it in Cura, if you want. Mark2 works with the standard values of the printer as well. What's the reason of your question? Did you noticed any serious drawbacks related to these values? As you already know, we are building an UMO with Mark2 upgrade but we have a problem. The first thing I've checked were the Cura settings... But that's not the problem... Any other idea @tinkergnome?
  7. I have also printed with the standard UM2 slicer settings, so that's not the problem... I mean that you check the firmware default accel/jerk settings. But indeed it’s weird Delfaut accel: 3000 and delfaut jerk: 20 So that's okay...
  8. Thanks for your reply! Okay, good to know I will try the Gcode on my UM2E+... @tinkergnome Gcode works perfectly on UM2E+... So the problem is on the firmware side...
  9. Thanks for your reply! Okay, good to know I will try the Gcode on my UM2E+...
  10. Why are the acceleration and Jerk settings so low on the standard Mark2 profile?
  11. I have also printed with the standard UM2 slicer settings, so that's not the problem...
  12. Problem is not solved with slower speed...
  13. Thanks for your reply! Here you have the Gcode. I will test it with the lower speed...
  14. Normally Cura wil overwrite your current Cura files and wil keep your settings, profiles and printers. If you want to keep the 2 versions, you can copy the files in Programs > Cura > Contests > Resources > resources > map of the files you want to copy...
  15. Hi, Do you have the newest Cura version? (2.6.2) You can download it here Pleas let me know if your problem is solved!
  16. Hi, Try to remove Cura from your computer. Then go to your Program files to remove the Cura folder. And then you can reinstall Cura 2.6... Let me know if it works now!
  17. Hi everyone! We have a problem with our project where we working on. We are trying to make the Mark2 upgrade compatible with the UMO. No worries, We wil publish it online when it works completely! So this is the problem: The printer makes very slow movements in the curves. We had to translate the UM2 firmware to the UMO mainboard so, I think the problem is on the Firmware side... Thanks! Have a nice day!
  18. An original birthday present, a mold made of the Ultimaker icon and filled with chocolate! Very delicious
  19. That is great indeed. One quick question. I am not familiar with the RepRap Discount LCD (googling it looks like it is an 128x64 dot matrix display. And here is my question, I assume I do not need the controller for such a board if I already have an ulticontroller. So would your port work with an umo (1.5.3) and an ulticontroller, where an 128x64 dot matrix is connected? If so that lcd as an example would be suitable. https://www.jaycar.com.au/arduino-compatible-128x64-dot-matrix-lcd-display-module/p/XC4617 Thanks again and cheers Hi @greengecko The idea is that you can use the UM2 interface and functionality on the UMO mainboard with a cheap Reprap Display. We have only made the UM2 firmware compatible with the UMO mainboard and RepRap Discount Display. So its possible that your display assembly will work but we are not sure. The UltiController is very expensive, so the cheapest option is to buy an Reprap display... When there is something else not clear, let me know!
  20. Today, The new regulator has arrived. I immediately soldered him to the mainboard. Now it is waiting for the new power supply @neatherbot Thanks for the video!
  21. We have something very interesting We've made the UM2 firmware compatible with the UMO with RepRap Discount LCD. So It would be possible to do the Mark2 upgrade on the UMO with the TinkerGnome firmware! More info coming soon! A big thanks to LowiekVDS for rewriting the firmware.
  22. That's nice! Also it would allow to um2 users to use the cheap lcd screens instead of the 80€+ um2 screen. Great job! Thanks, Yes indeed! Stay tuned, and get the display for your UMO! We will publish the firmware online
  23. We have something very interesting We've made the UM2 firmware compatible with the UMO with RepRap Discount LCD. More info coming soon! A big thanks to LowiekVDS for rewriting the firmware.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!