Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

Personal Information

  • Country
  1. I think your solution, nallath, will work best. For whatever reason I was only perusing the normal versions of Cura, as opposed to the Lulzbot-specific ones. This does keep me dumber to the functioning of gcode, but it will be easiest. Didier, I think I'll play with some of those commands as well, in order to learn. Thank you both!
  2. I am printing with a Lulzbot Mini printer that now has Cura 15.4.4 recently installed. Cura 15 is an unfamiliar change from the earlier versions of Cura that allowed me to manipulate the print head position and bed/head temperatures with a simple interface. So I started to tinker with the gcode in the newer version to try and get what I wanted from the driver. I'm now running this start gcode: ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line ;M109 S{print_temperature} ;Uncomment to add your own temperature line G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off M109 S180 B210 F1;activate auto temp min 180 max 210 scaling factor 1 (for PLA) G28; Home Axis G29; Z-Probe the bed (requires Z-Probe!) G1 Z5.0 F9000 ;move the head 5mm up for CYA clearance G92 E0 ;zero the extruded length M117 Cleaning...;Put Cleaning message on screen G1 X100 Y0 F4000 ; move half way along the front edge G1 Z1 ; move nozzle close to bed M109 S200 ; heat nozzle to 200 degC and wait until reached G4 P10000 ; wait 10 seconds for nozzle length to stabilize G1 E10 ; extrude 10 mm of filament G1 z15 F12000 E5 ; move 15 mm up, fast, while extruding 5mm G92 E0 ; reset extruder M117 Printing...;Put printing message on LCD screen It begins printing the object 5-10 millimeters off of the print bed, which I think is attributed to the fact that the bed leveling washers in the corners of the bed are approximately that same height (5-10mm) off of the bed. It seems not to recognize that. What is the ideal start gcode for me to run on a Lulzbot Mini with Cura 15.4.4?
  • Create New...