Jump to content
Ultimaker Community of 3D Printing Experts

fabreax

Member
  • Content Count

    161
  • Joined

  • Last visited

Everything posted by fabreax

  1. I'm sorry, I have replaced my 3 UM3 by UM2+, much more reliable !
  2. There is no release date for the 0.25mm print core ?
  3. You can find the logs here : https://we.tl/CvjfNsZWJ4
  4. Yes, I will after the current print.
  5. The firmware is the latest. The bug appears after a print fail (Ultimaker 3 gcode in Cura instead of Ultimaker 3 Extended). This should be managed without rebooting the UM3.
  6. Hello, Everytime I use one of my 3 Ultimaker 3, every time I have a bug :
  7. Yes, I need to write on the print core the UM3 and the slot.
  8. For instance to change the AA core to BB core. And in the future 0.25mm nozzle, I use it a lot on the UM2+. I disable auto calibration because manual leveling does a better job and I do not use wifi because I always need to be near the printer (insert filament, verify the beginning of the print). It's interesting to have the 2 points of view.
  9. i'll agree that there are more things that could go wrong but i definitely disagree with the reliability.. running 5 UM3s compared to running 5 UM2s is a total breeze.. the UM3 is much more reliable in my experience.. What kind of issues do you have on the UM2 ? issues I had.. i replaced them all with UM3.. ;-) so i thought about it and i'm not going to list them :)most of them are solved with the UM2+.. for me, the biggest thing is the replaceable print heads.. any issue.. at all... heater, temp sensor, nozzle, heater block.. whatever.. replace it under a minute.. no down
  10. i'll agree that there are more things that could go wrong but i definitely disagree with the reliability.. running 5 UM3s compared to running 5 UM2s is a total breeze.. the UM3 is much more reliable in my experience.. What kind of issues do you have on the UM2 ?
  11. From my point of view, the UM3 is not reliable at all compared to the UM2+
  12. The old glass with round corners was pretty and safe.
  13. The angle is not "functional", so it will always work. But or a 4430€ printer, we don't want a chinese Prusa glass ...
  14. My UM3 has been repaired ! They have replaced the cable from the motherboard to the print head. So, it was again a faulty Ultimaker 3 !
  15. I have sent the 2 faulty glass plate to the reseller. He sends me 2 new glass plates : Is it the new cut or again faulty glass plates ?
  16. Thanks @SandervG I have sent the glass plates back in order to replace them. Whhen I buy an Ultimaker product, I have hardware or software issues with half of them ! I wanted to highlight each issue (you can find the history of my issues on the forum).
  17. Hello, Again, I have bough an Ultimaker product, and there is still no QA : 2x35€ glass plate, very poor "rounded" cut ! Every time I buy an Ultimaker printer or an Ultimaker accessory, every time I loose my time and money. Please learn from Formlabs !
  18. Please be aware that Active Leveling also measures the Z-offset between nozzle 1 and 2. It does so more accurately than most users can. Yes, only if nozzles has been cleaned ... manually
  19. From my point of view, auto level is a waste of time. Manual level avoid errors.
  20. Only once, after a off/on, everything is ok.
  21. The 3.6.9 testing version fix the need to reboot the UM3 after each print (no file found on the USB stick). I have an ERR18 with only one UM3 and only one printcore, is it a possible issue of the 3.6.90 version ?
  22. Hi, Is it a known issue ? I had to restart the UM2 and everything is ok.
×
×
  • Create New...