[New firmware for Ultimaker 3, version 3.6]

No, in case of an error, I also have to reboot the UM3 (https://ultimaker.com/en/community/42426-print-head-error-communication)

[Print head error communication]

The ER18 occured again at the beginning of the print ! The print cores fan is on !

[Print head error communication]

Hi,

Thanks for your help.

 

Is your front fan running while it says preparing?

 

I don't know, the printcore unloading works now ...

 

Is your silicone piece still in place?

 

Yes

 

Have you tried re-seating your printhead cable?

 

Not yet

[Print head error communication]

I have removed the printcore, the 4 contact points are clean.

[Print head error communication]

I have tried to remove the print core but it'm still waiting, as suggested :

[Print head error communication]

Hello,

Again, I have a new issue with one of my Ultimaker 3.

First, I had several print errors like "reaching the temperature is too long".

And now, a failed print :

The head stops on the part. I think it's a good idea to lower the build plate after a fail :

Then, I have done a successfull "heater sensor test" :

I think I should have bought UM2 instead of UM3 ...

[New firmware for Ultimaker 3, version 3.6]

A bug : try to print a gcode with an accent or 92 characters ... The screen turn off when you select the file before printing !

[New firmware for Ultimaker 3, version 3.6]

With S3D and only one STL, I have the encoding error too @SandervG :

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: 2017-04-05 18:04:05,503 ERROR gcodeFileHandler Error accessing file 'UM3_XT.gcode' at line 1.

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: Traceback (most recent call last):

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: File

"/usr/share/griffin/griffin/printer/fileHandlers/gcodeFileHandler.py", line 55, in run

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: line = f.readline()

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: File "/usr/lib/python3.4/encodings/ascii.py", line 26, in decode

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: return codecs.ascii_decode(input, self.errors)[0]

Apr 05 18:04:05 ultimakersystem-ccbdd30010b9 python3.4[476]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xe9 in position 535: ordinal not in range(128)

It is due to an extended char 'é' in the gcode file :

; G-Code generated by Simplify3D® Version 3.1.1

; avr. 5, 2017 at 2:49:19

; Settings Summary

; processName,Process1

; applyToModels,uper modifié avec le bon

[New firmware for Ultimaker 3, version 3.6]

Hi,

I have the same error with Simplify3D but it only appears with one STL :

UnicodeDecodeError: 'ascii' codec can't decode byte 0xe9 in position 535: ordinal not in range(128)

[New firmware for Ultimaker 3, version 3.6]

I'm also using S3D with the same issue.

[Ne pas acheter d'Ultimaker d'occasion en période de garantie !]

J'ai reçu aujourd'hui une nouvelle bande led de la part de MakerShop, après qu'Ultimaker ait insisté.

[Do not buy a used Ultimaker within the warranty period]

I have received today a new led strip. Thanks @SandervG and Ultimaker. I always have to contact Ultimaker directly ...

[New firmware for Ultimaker 3, version 3.6]

I had the issue with another UM3

[New firmware for Ultimaker 3, version 3.6]

It displays there is no file on the USB card.

[Ultimaker 3 power consumption]

Thanks @Daid ! 120W average is what I need

[New firmware for Ultimaker 3, version 3.6]

I have only had this happen (USB difficulties) since upgrading to this firmware version.

+1 ! After every print (S3D on USB stick), I have to restart the UM3 !

[New firmware for Ultimaker 3, version 3.6]

Yes, I had the same behaviour today !

[Ultimaker 3 no video]

Hi, the new UM3 firmware has solved the issue !

[Ultimaker 3 power consumption]

 

@SandervG, is there a way to monitor the UM3 power consumption ?

[How to set IP address without WiFi or DHCP]

The um3 has 2 ip addresses.  One for wired.  And one for wireless.  I assume you mean the wired one?

 

I think the UM3 has 2 MAC addresses : wifi interface and RJ45 interface. The UM3 can be connected to only one, with one IP address.

[Ultimaker 3 single extrusion Simplify3D profile]

40mm/s retractation instead of 25mm/s is far better ! I will reduce coast at end (currently 1mm) and wipe (currently 1mm) :

[Ultimaker 3 single extrusion Simplify3D profile]

It seems that in my profile, the second print core heatup. I only want a single print with the first print core. Could you help me to remove code about the second print core ?

My profile (based on yours) : https://we.tl/KIQAdMe5Pv

[New firmware for Ultimaker 3, version 3.6]

Thank you so much !

[Ultimaker 3 single extrusion Simplify3D profile]

I'm away till tomorrow but will check my old profiles folder.

Thank you so much . I will try 40mm/s retractation instead of 25mm/s ...

[Print issue for using Simplify3D for Ultimaker3.]

"Print Finished" in a second, with no print starting at all!

S3D support have sent me another profile file and I never had again the issue !

First profiles they made a typo on the header and the UM3 is very very strict with that header...

Good that they fixed it, I sent s3d support the fix 4months ago...

It has been fixed after several emails, they send me 2 profiles, the latest worked.