Jump to content

fabreax

Dormant
  • Posts

    161
  • Joined

  • Last visited

Posts posted by fabreax

  1. - 215°C temperature for Ultimaker PVA (default) or 210°C for Formfutura Atlas support

    - I'm still using a prime tower because without, I have little holes on the walls, due to PVA residues.

    - 35° support overhang because the walls are not clean at 45°

    - 25% support density (15% can be ok)

    - 0 support Z distance

    - 0 support X/Y distance (if not, the part is not well supported at high angles)

    - 0 minimum support X/Y distance (same reason)

    - 2mm support horizontal expansion (or more, depending on the part, PVA does not stick on the PLA, this setting can help)

    - enable support interface

    - 1mm support interface thickness (default 0.8mm should be ok)

    - 100% support interface density

    - 0.1mm support interface resolution

    And the most important thing is to be sure to have no humidity in the PVA (you can put your entire spool at 70°C in the oven for 5 hours).

    • Like 1
  2.  

    Hi, I'm not able to configure the UM3 camera like a standard IP camera (Foscam). I'm using a chrome extension to display my Foscam cameras but UM3 is only available as a web page ?

     

    It's a pretty standard MJPG stream, I'm pretty sure just about anything can view it. (A browser is just simple)

     

    Yes, http browser can read it. There is no "rtsp" ?

  3. I'm sorry, this will more clear :

     

     

    I have replaced my Z-motor. The new one doesn't had this sound when I move it by hand. However, the sound during printing seems to be normal because I have the same on the other printer.

    @SandervG, are you sure that the auto level is off after 20 layers ?

  4. Thanks SandervG for your help. The french resseller don't want to give me a new one ! He wants to repair it !

    This is how I received it :

    IMG_20170120_094855.thumb.jpg.aed4290876fc4f733f5e38e7284dfcde.jpg

    IMG_20170120_094904.thumb.jpg.4dae8190424a970c2a8736202a77cfb2.jpg

    I don't know how I will receive it after 2 new shipping.

    I will receive a "repaired" UM3 which is not what I have bought. I have bought a NEW professionnal high quality printer !

    I'm very disapointed with 2 UM3, only 1 UM3 had no issue.

    IMG_20170120_094855.thumb.jpg.aed4290876fc4f733f5e38e7284dfcde.jpg

    IMG_20170120_094904.thumb.jpg.4dae8190424a970c2a8736202a77cfb2.jpg

  5. After several issues with my Ultimaker 3 (solved with a waste of time), I have bought 2 new UM3.

    This is the first start :

    IMG_20170120_113809.thumb.jpg.b5f8653c0917926a76c25298dded4f62.jpg

    I cannot update the firwmare because I cannot see the menu !

    What the hell are you doing at Ultimaker (@SandervG) ! Is it a 4500€ quality control ?!

    (you can also see a bad cut of the white plate below ER25 text)

    IMG_20170120_113809.thumb.jpg.b5f8653c0917926a76c25298dded4f62.jpg

×
×
  • Create New...