Jump to content

philipyeah

Dormant
  • Posts

    2
  • Joined

  • Last visited

Personal Information

  • Country
    DE

philipyeah's Achievements

0

Reputation

  1. Hello, I am just starting printing something with PVA, but always with failure. According to this old thread https://ultimaker.com/en/community/3458-printing-with-pva, I set almost the same parameters. But still doesn't work. There are mainly two issues that bother me. 1. it seems that PVA is difficult to stick on the plate, even if with glue (the printer I use is ultimaker 2, with glass plate). I set the temperature from 60 to 90 degree celcius, but none of them could let PVA stick on the plate. The print temperature was set as suggested in the previous thread, at 206 degree celcius, and other settings were also followed as the thread mentioned. Is there something wrong that can explain why my PVA not sticking on the plate? 2. the second issue was that the nozzle stop extruding PVA after printing for a while, this really confused me, has anyone an idea about that? Thank you guys in advance! Ye
  2. Hello, this thread is though old enough, I need the advice indeed, for I am trying to print something with PVA but with great problems. 1. it seems that PVA is difficult to stick on the glass plate, even if with glue (my printer is ultimaker 2). I set the temperature from 60 to 90 degree celcius, but none of them could let PVA stick on the plate. The print temperature was set as the suggested, at 206 degree celcius, and other settings were also followed by tyler_farrell29. Is there something wrong that can explain why my PVA not sticking on the plate? 2. the second issue was that the nozzle stop extruding PVA after printing for a while, this really confused me, has anyone an idea about that? Thank you guys in advance! Ye
×
×
  • Create New...