DeathMachine

I just started having the same problem after firmware up date !!! Why F did I do that !!! augg !!!! Ultimaker 2 with olssen block any thing over 240 it shuts down. the pic.

will cura ever go back to multi core support .

Pillowing . Very long time between updates for me. But the day before update working pertific, now pillowing, small gaps, >04 nozzle it is clean. Every time I up date cura , Nothing but problems hair pulling, cussing to get quality of prints . AUGGG!

couldn't get any of my old curas to open . dumped them off my comp. now I can't get 2.6 to load! Any help would be great! Ed

I've been using 240c and 90 bed . Only printed a few things all good.

Damn cool! thanks for sharing.

Very interested in this Idea. Thinking the prometheus system or the diamond hot end with only 2 in feeds due to room with the UM head. Ed

Was thinking about insulating the underside of the heated bed to reduce heating time. Any thoughts? Ed

I think you are asking too much from a paint coating. I would choose a different material to make your print from.

I add it to one of those things that happens, ran that part 3 more times no problem. Die Antwoord, I think they're freaky and I like them a lot!

Interesting design . so 2 heaters powered by UM2 board? Still have the heated bed working? 1.6 nozzle wow , think swappable nozzles I would great on that. You know this is a part that could be 3d printed in titanium.

Any other great info on PETG. just got my roll from esun. Thanks Ed

[media-thumb=32460] [/media-thumb]

Ok I've printed this part many times. the only thing differnt I limited the draft sheild at 8mm and I bumped. Last 5 mins of print out of 4 hours it starts delaminating . At this point it's just a 2mm wide wall 3mm high peeling off. I'm looking at rest of print it looks great. Have pic's will try to get them on here but for some reason now site won't let me upload pic's now? abs temp 245 used a lot of mitus filament all of it good fan 20% .4 nozzle brim 10mm draft sheild 8mm high Complete side note for as much light the Ultimaker 2 puts out , like the worst place in the world to take a pic of your work! What the!