[Ultimaker App 2.0 has been released]

It means that you don't have to type the serial number, it can read it from the bar-code.

 

Ok I'm slow, lol. It reads the barcode that is on the bottom of my machine. So then what.?

ED

[Ultimaker App 2.0 has been released]

 

so it's just this web site on phone right?

 

It also has a bar-code scanner for the serial number.

 

What does that mean?

ED

[Ultimaker App 2.0 has been released]

so it's just this web site on phone right?

[Ultimaker Community Spotify Playlist]

 

 

 

There is a playlist that is a collective of what the Ultimaker community likes to listen to.

If you follow this link you should be able to see it, follow it and add your 3 favorite songs!

@Peetersm, could you try this link again? For me it works without any difficulties.

Thanks!

 

just comes up browsing page for me.

ED

 

yeah same for me it tries to load but then I end up here:

https://play.spotify.com/browse

 

I just tried, if you type in 'Ultimaker' in search, the first playlist that is being offered, so not the artist but the playlist, is the Ultimaker community playlist

 

Only thing I could find Ultimaker spotify:track:7LWYpvVwOot6TsYYgSzGGh

[turn ultimaker 2 into a 3D doodler?]

Mine can do that stock. [print=4828][/print]

[What type of font is that ultimaker uses?]

Thanks guys, even corporate rules too. LOL

Proxima Nova ? no wonder I couldn't find it, out of all my programs i have I don't have that font.LOL

ED

[What type of font is that ultimaker uses?]

Hey,

What type of font is that ultimaker uses?

Thanks ED

[Ultimaker 3 release date ?]

I went to the UK Distributor the other day,  and spent about 3 hrs with this machine,  and I have to say I like some parts of the machine, but the noise of the fans is beyond a joke.. there are 4 fans in the enclosure and another under the machine,  when the machine is idle 3 of the fans still run. Don't like that at all... But had a chance to look at Rep Rap x350pro which was uber quiet.

 

really that sucks.

[Ultimaker Community Spotify Playlist]

There is a playlist that is a collective of what the Ultimaker community likes to listen to.

If you follow this link you should be able to see it, follow it and add your 3 favorite songs!

@Peetersm, could you try this link again? For me it works without any difficulties.

Thanks!

 

just comes up browsing page for me.

ED

[Ultimaker Community Spotify Playlist]

Ok is there a playlist for ultimaker club? Or did I miss something?

ED

[Ultimaker Community Spotify Playlist]

 

Isn't this even better?

Ok, I added:

Gallowstreet - Diesel

Galt MacDermot - Coffee cold

My Baby - Uprising.

Enjoy!

 

Well I don't have spotify, and movies related to UMs make sense, a music playlist with all kinds of stuff in it doesn't really imho.

 

I disagree , I like to slam to music while working on solid hurts! LOL

[Ultimaker Feet]

Making some feet for my ultimaker and much to my dismay I find the plexiglass sides very in size,

5.68 mm , 6.49 mm. almost a full mm. what the ?

ED

[general forum feedback]

On the profile page you have two selections. The first one, which says 'all' by default lets you restrict the entries to a category, e.g. 'prints'. That should be what you are looking for, right?

 

oh! thank you!

Ed

[general forum feedback]

An idea about profiles, should be able to look up someone's prints without going through all the posts.

ED

[Ultimaker 3 release date ?]

sorry to disagree with you LePaul.  Farrari would not have released the second generation machine Knowing full well that the first had a problem (Feeder)

and at the current uk Pricing the UM2+ is selling for £1,798.00 and the Sigma BCN3d £1,663.20

No Brainer in my opinion.

 

Wow duel printing can be done? LOL Sigma BCN3d that's cool machine!.

[Layer shifts mid-way through the print.]

Sounds like a mechanical problem to me belt slipping?

Ed

[Layer shifts mid-way through the print.]

same part? or every part you do?

[Front panel made from?]

What is the front, top, back, panel made from. Doesn't feel solid aluminum. Metal clad plastic?

Thanks Ed

[Ulticreatr 2X: Dual extrusion for Ultimaker 2 and Ultimaker 2+]

Hi,

I am also looking for the files. The Cura-Patch is available here:

http://ulti.creatr.it/en/support/2x/cura-uc2x-v1-2.ini

Following the easy syntax you can find files for the hex-files:

http://ulti.creatr.it/en/support/2x/Ultimaker-2-Ulticreatr-2X-v1-1.hex

http://ulti.creatr.it/en/support/2x/Ultimaker-2Extended-Ulticreatr-2X-v1-1.hex

Unfotunately the gcode-Files are not available via this method. I don't know if the hex-files are the correct ones but I also want to start working with my kit as soon as it arrives (I ordered today)

Best regards

Florian

 

Please keep us updated on the duel quest.

Ed

[Ulticreatr 2X: Dual extrusion for Ultimaker 2 and Ultimaker 2+]

The only thing that isn't sufficient is the power supply. We cannot run the heated bed at the same time as the heater cartridges so the startup procedure is the following:

- Heat the bed to 70°C

- power off the bed and heat the nozzles.

- start printing. Like this the first layer sticks perfectly to the bluetape. Both PLA and the soluble SM-310 stick well.

 

This was disappointing to read. Are you using the 25 watt heaters?

Ed

[Olsen block What watt heater comes with that, note my kit is an older one.]

I really have no Idea how old my machine is. Bought it used from a medical equipment clearing house. The machine read 1 hour print time 20 hours on. and I believe it.

Supper clean, nothing missing, all the original packing. Outside of box was dirty as pig pen. LOL.

You're right, Olsson kit didn't have the wire in the box. I guess I got lucky and scored extra regular nozzle with heater wire.( makes it a 25 watt)

Included pic of machine. As you can see it has no extra filament guides or the holes for it.

Thanks for your help.

ED

[Olsen block What watt heater comes with that, note my kit is an older one.]

It was an olsen block add on that came from ultimaker.

[Olsen block What watt heater comes with that, note my kit is an older one.]

Olsen block What watt heater comes with that, note my kit is an older one.

Thanks Ed

[Usage of closed chamber on UM2 (Desktop 600 Enclosure of 3dprintclean)]

Wow that's an expensive solution... https://3dprintclean.myshopify.com/

I use this cover and this door but for me it's to filter the noise because me colleagues were complaining

Still 200 euros for both upgrades but worth every euro imo.

Works impressively good, I can say about 70% of all noise of the printer is gone.

This is how it looks like with those upgrades :

 

Nice, going to have to do something like that.

[Enclosure]

My final set up.

More of a "draft guard" than an enclosure.

I took an extra large oven bag and cut it open along one edge. I wrapped it around the front, sides and top then used binder clips to hold it in place.

The entire back side is open. The electronics underneath can breathe because of the tall feet.

 

Bugging the Boss, Nice!