Hello neotko,
I just uploaded the Ultimaker/UM2.1 JarJarExtended files.
In the bed leveling process the bed height looks good but of the 3 locations the print head cycles through the first location is wrong. Instead of moving to the center rear it moves to center front then moves back along Y then left and right along X. The 2nd and 3rd locations look right. The first location seem backwards. The home head works fine.
Here's the new echo from JarJarExtended.
Connecting...
start
Printer is now online.
echo:Marlin 1.0.0
echo: Last Updated: Aug 7 2016 09:28:58 | Author: Version DEV
Compiled: Aug 7 2016
echo: Free Memory: 2023 PlannerBufferBytes: 1232
echo:Stored settings retrieved
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z200.00 E369.00
echo:Maximum feedrates (mm/s):
echo: M203 X300.00 Y300.00 Z40.00 E45.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X9000 Y9000 Z100 E10000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z-34.90
echo:PID settings:
echo: M301 P10.03 I1.50 D70.00
echo:SD card ok