Gfrankl

So, I tried the same print in another S5 pro that I have with the same result. Looking at the hardware, I noticed that the cable for the Airmanager had indeed come loose. I think this may have happened because I used the clips on the connecting wire (between printer and air manager) to the boden tube for Print Head 2. I wonder if the motion of the feeding filament caused the connection to come loose. I disconnected the support clips (the wire is now freely hanging) and I am running the print again to see if the same issue occurs (for the 4th time).

@SandervG has there been any resolution to this error? I`ve checked connections and all works for awhile and then ER80 pops up and ends my print.