Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Everything posted by amagro

  1. Autodesk was introduced G2 and G3 codes in Fusion 360 slicer. Let's hope Ultimaker could also do it soon.
  2. https://github.com/Ultimaker/Cura/issues/4630
  3. Hello @smartvionics I'm working with Cura for a biological project and I'm was also suffering with the issue of the single wall with only one move, till I found this post. Because i'm working with high fluidics materials, long travel moves could result in oozing material, so maybe you could help me on this. For simple tests I pretend to only print some lines, like on the below image. The problem is after finish print one line the extruder will return to the initial point in order to pass to the next line, is there any way to the extruder pa
  4. I think that is what most of the people do. This is my suggestion for the new interface.
  5. Here's the log file. cura_log_monitor_crash.zip BTW, the Show Configuration Folder is not opening, I went manually to the Cura AppData folder.
  6. After config an Octoprint connection with a printer, cannot open anymore the "Monitor" page, Cura instantly crashes. Is there any log file that I can send for debugging? Also happens with 3.4.1.
  7. Hello, Is there any way to save the standard post processing plugins, with the plugin state, in a Cura Project? Thanks
  8. A workaround for your first problem: https://github.com/Ultimaker/Cura/issues/3451
  9. I'm also had for two times this issue only with long prints. On the bigger gcode that I send, the stop printing happens between the 174 and 178 mm. It's very inconsistent since I had a lot of smal printers without any problems. Tks Cura 3.4.1 Fail Print.zip
  10. Hello @smartavionics. With friends help I finally had the Cura with you modifications working on Linux. If you like you could share your Cura archives with your last "Combing" work. Thanks
  11. Hello @smartavionics, I'm having some issues opening the Cura.sh file, this are the erros: _________________________________________________________________________________________________________________ beei@beei-VirtualBox:~$ cd Desktop/cura/bin/ beei@beei-VirtualBox:~/Desktop/cura/bin$ ./cura.sh Error in sys.excepthook: Traceback (most recent call last): File "/home/beei/Desktop/cura/lib/python3.5/site-packages/numpy/core/__init__.py", line 16, in <module> from . import multiarray ImportError: libgfortran.so.3: cannot open shared object
  12. Thanks again @smartavionics, I will print the gcode that you send me. So if you can, please send me the Linux archive with your Cura changes.
  13. Hello @smartavionics, Thanks for your prontitude on solving this issue. This model is for a school project and I needed to print some of them till the end of this week. Is there any chance you could send me the Cura executable with your changes? Thanks
  14. Hello @smartavionics, Here is the project. MM_combo.curaproject.3mf.zip
  15. Is Combing really working? why all those straight travel movements between the hexagons? And please optimize the toolpath generator, this is a big mess on a simple print as you can see on the image below. Thanks
  16. Ok, I must choose a percentage of filament in order to activate this setting.
  17. Cannot find that setting. But it's visible. (!?)
  18. Where can we enable the "Infill support" ? Tks
  19. I always thought that line width should be 20% more (and not less) that nozzle size, this was based on tips from reprap; Slic3r; Simplify3D, etc
  20. https://github.com/Ultimaker/Cura/issues/3451
  21. I'm using a BEETHEFIRST_plus, the extruder have a direct drive, and normally I don't have problems extruding any material, but with TPU is always more tricky. Cura could also be more TPU friendly.
  22. @tinkergnome Is Polyflex by Polymaker
  23. All velocities are at 20mm/s, temperature is 225C, maybe I can go lower. This are the results: How can I get rid of this bloops?
  • Create New...